lkml.org 
[lkml]   [2019]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 1/2] dt-bindings: backlight: lm3630a: add enable_gpios
From
Date
Andreas

On 9/12/19 4:32 PM, Andreas Kemnade wrote:
> add enable-gpios to describe HWEN pin
>
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> Acked-by: Daniel Thompson <daniel.thompson@linaro.org>

Reviewed-by: Dan Murphy <dmurphy@ti.com>


> ---
> changes in v2: added example
> changes in v3: added Acked-by
> changes in v4: moved enable-gpios to the right position
> in the example
> .../bindings/leds/backlight/lm3630a-backlight.yaml | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> index dc129d9a329e..c8470628fe02 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> @@ -29,6 +29,10 @@ properties:
> '#size-cells':
> const: 0
>
> + enable-gpios:
> + description: GPIO to use to enable/disable the backlight (HWEN pin).
> + maxItems: 1
> +
> required:
> - compatible
> - reg
> @@ -96,6 +100,7 @@ examples:
> led-controller@38 {
> compatible = "ti,lm3630a";
> reg = <0x38>;
> + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
>
> #address-cells = <1>;
> #size-cells = <0>;

\
 
 \ /
  Last update: 2019-09-13 16:08    [W:0.138 / U:9.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site