lkml.org 
[lkml]   [2019]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch 01/13] media: am437x-vpfe: Fix suspend path to always handle pinctrl config
Thanks for the reviews.

Hans Verkuil <hverkuil@xs4all.nl> wrote on Fri [2019-Sep-13 14:59:28 +0200]:
> On 9/9/19 6:27 PM, Benoit Parrot wrote:
> > From: Dave Gerlach <d-gerlach@ti.com>
> >
> > Currently if vpfe is not active then it returns immediately in the
> > suspend and resume handlers. Change this so that it always performs the
> > pinctrl config so that we can still get proper sleep state configuration
> > on the pins even if we do not need to worry about fully saving and
> > restoring context.
> >
> > Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
> > Signed-off-by: Benoit Parrot <bparrot@ti.com>
> > ---
> > drivers/media/platform/am437x/am437x-vpfe.c | 44 ++++++++++-----------
> > 1 file changed, 22 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
> > index 2b42ba1f5949..ab959d61f9c9 100644
> > --- a/drivers/media/platform/am437x/am437x-vpfe.c
> > +++ b/drivers/media/platform/am437x/am437x-vpfe.c
> > @@ -2653,22 +2653,22 @@ static int vpfe_suspend(struct device *dev)
> > struct vpfe_device *vpfe = dev_get_drvdata(dev);
> > struct vpfe_ccdc *ccdc = &vpfe->ccdc;
> >
> > - /* if streaming has not started we don't care */
> > - if (!vb2_start_streaming_called(&vpfe->buffer_queue))
> > - return 0;
> > + /* only do full suspend if streaming has started */
> > + if (vb2_start_streaming_called(&vpfe->buffer_queue)) {
> >
>
> It's a bit ugly to start a block with an empty line. Can you remove it?

Yep no problem.

>
> > - pm_runtime_get_sync(dev);
> > - vpfe_config_enable(ccdc, 1);
> > + pm_runtime_get_sync(dev);
> > + vpfe_config_enable(ccdc, 1);
> >
> > - /* Save VPFE context */
> > - vpfe_save_context(ccdc);
> > + /* Save VPFE context */
> > + vpfe_save_context(ccdc);
> >
> > - /* Disable CCDC */
> > - vpfe_pcr_enable(ccdc, 0);
> > - vpfe_config_enable(ccdc, 0);
> > + /* Disable CCDC */
> > + vpfe_pcr_enable(ccdc, 0);
> > + vpfe_config_enable(ccdc, 0);
> >
> > - /* Disable both master and slave clock */
> > - pm_runtime_put_sync(dev);
> > + /* Disable both master and slave clock */
> > + pm_runtime_put_sync(dev);
> > + }
> >
> > /* Select sleep pin state */
> > pinctrl_pm_select_sleep_state(dev);
> > @@ -2710,19 +2710,19 @@ static int vpfe_resume(struct device *dev)
> > struct vpfe_device *vpfe = dev_get_drvdata(dev);
> > struct vpfe_ccdc *ccdc = &vpfe->ccdc;
> >
> > - /* if streaming has not started we don't care */
> > - if (!vb2_start_streaming_called(&vpfe->buffer_queue))
> > - return 0;
> > + /* only do full resume if streaming has started */
> > + if (vb2_start_streaming_called(&vpfe->buffer_queue)) {
> >
>
> Ditto.

Yep no problem.

>
> > - /* Enable both master and slave clock */
> > - pm_runtime_get_sync(dev);
> > - vpfe_config_enable(ccdc, 1);
> > + /* Enable both master and slave clock */
> > + pm_runtime_get_sync(dev);
> > + vpfe_config_enable(ccdc, 1);
> >
> > - /* Restore VPFE context */
> > - vpfe_restore_context(ccdc);
> > + /* Restore VPFE context */
> > + vpfe_restore_context(ccdc);
> >
> > - vpfe_config_enable(ccdc, 0);
> > - pm_runtime_put_sync(dev);
> > + vpfe_config_enable(ccdc, 0);
> > + pm_runtime_put_sync(dev);
> > + }
> >
> > /* Select default pin state */
> > pinctrl_pm_select_default_state(dev);
> >
>
> Regards,
>
> Hans

\
 
 \ /
  Last update: 2019-09-13 15:23    [W:0.088 / U:7.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site