lkml.org 
[lkml]   [2019]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Patch 01/13] media: am437x-vpfe: Fix suspend path to always handle pinctrl config
From
Date
On 9/9/19 6:27 PM, Benoit Parrot wrote:
> From: Dave Gerlach <d-gerlach@ti.com>
>
> Currently if vpfe is not active then it returns immediately in the
> suspend and resume handlers. Change this so that it always performs the
> pinctrl config so that we can still get proper sleep state configuration
> on the pins even if we do not need to worry about fully saving and
> restoring context.
>
> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> ---
> drivers/media/platform/am437x/am437x-vpfe.c | 44 ++++++++++-----------
> 1 file changed, 22 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
> index 2b42ba1f5949..ab959d61f9c9 100644
> --- a/drivers/media/platform/am437x/am437x-vpfe.c
> +++ b/drivers/media/platform/am437x/am437x-vpfe.c
> @@ -2653,22 +2653,22 @@ static int vpfe_suspend(struct device *dev)
> struct vpfe_device *vpfe = dev_get_drvdata(dev);
> struct vpfe_ccdc *ccdc = &vpfe->ccdc;
>
> - /* if streaming has not started we don't care */
> - if (!vb2_start_streaming_called(&vpfe->buffer_queue))
> - return 0;
> + /* only do full suspend if streaming has started */
> + if (vb2_start_streaming_called(&vpfe->buffer_queue)) {
>

It's a bit ugly to start a block with an empty line. Can you remove it?

> - pm_runtime_get_sync(dev);
> - vpfe_config_enable(ccdc, 1);
> + pm_runtime_get_sync(dev);
> + vpfe_config_enable(ccdc, 1);
>
> - /* Save VPFE context */
> - vpfe_save_context(ccdc);
> + /* Save VPFE context */
> + vpfe_save_context(ccdc);
>
> - /* Disable CCDC */
> - vpfe_pcr_enable(ccdc, 0);
> - vpfe_config_enable(ccdc, 0);
> + /* Disable CCDC */
> + vpfe_pcr_enable(ccdc, 0);
> + vpfe_config_enable(ccdc, 0);
>
> - /* Disable both master and slave clock */
> - pm_runtime_put_sync(dev);
> + /* Disable both master and slave clock */
> + pm_runtime_put_sync(dev);
> + }
>
> /* Select sleep pin state */
> pinctrl_pm_select_sleep_state(dev);
> @@ -2710,19 +2710,19 @@ static int vpfe_resume(struct device *dev)
> struct vpfe_device *vpfe = dev_get_drvdata(dev);
> struct vpfe_ccdc *ccdc = &vpfe->ccdc;
>
> - /* if streaming has not started we don't care */
> - if (!vb2_start_streaming_called(&vpfe->buffer_queue))
> - return 0;
> + /* only do full resume if streaming has started */
> + if (vb2_start_streaming_called(&vpfe->buffer_queue)) {
>

Ditto.

> - /* Enable both master and slave clock */
> - pm_runtime_get_sync(dev);
> - vpfe_config_enable(ccdc, 1);
> + /* Enable both master and slave clock */
> + pm_runtime_get_sync(dev);
> + vpfe_config_enable(ccdc, 1);
>
> - /* Restore VPFE context */
> - vpfe_restore_context(ccdc);
> + /* Restore VPFE context */
> + vpfe_restore_context(ccdc);
>
> - vpfe_config_enable(ccdc, 0);
> - pm_runtime_put_sync(dev);
> + vpfe_config_enable(ccdc, 0);
> + pm_runtime_put_sync(dev);
> + }
>
> /* Select default pin state */
> pinctrl_pm_select_default_state(dev);
>

Regards,

Hans

\
 
 \ /
  Last update: 2019-09-13 15:00    [W:0.266 / U:3.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site