lkml.org 
[lkml]   [2019]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [EXT] Re: [PATCH 2/3] ASoC: fsl_asrc: update supported sample format
Date
Hi

>
> On Tue, Sep 10, 2019 at 02:07:25AM +0000, S.j. Wang wrote:
> > > On Mon, Sep 09, 2019 at 06:33:20PM -0400, Shengjiu Wang wrote:
> > > > The ASRC support 24bit/16bit/8bit input width, so S20_3LE format
> > > > should not be supported, it is word width is 20bit.
> > >
> > > I thought 3LE used 24-bit physical width. And the driver assigns
> > > ASRC_WIDTH_24_BIT to "width" for all non-16bit cases, so 20-bit
> > > would go for that 24-bit slot also. I don't clearly recall if I had
> > > explicitly tested S20_3LE, but I feel it should work since I put there...
> >
> > For S20_3LE, the width is 20bit, but the ASRC only support 24bit, if
> > set the ASRMCR1n.IWD= 24bit, because the actual width is 20 bit, the
> > volume is Lower than expected, it likes 24bit data right shift 4 bit.
> > So it is not supported.
>
> Hmm..S20_3LE right-aligns 20 bits in a 24-bit slot? I thought they're left
> aligned...
>
> If this is the case...shouldn't we have the same lower-volume problem for
> all hardwares that support S20_3LE now?

Actually some hardware/module when they do transmission from FIFO
to shift register, they can select the start bit, for example from the 20th
bit. but not all module have this capability.

For ASRC, it haven't. IWD can only cover the data width, there is no
Other bit for slot width.

Best regards
Wang shengjiu



\
 
 \ /
  Last update: 2019-09-13 07:49    [W:0.089 / U:7.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site