lkml.org 
[lkml]   [2019]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 10/17] x86/entry/64: Introduce the FIND_PERCPU_BASE macro
Date
GS base is used to find per-CPU data in the kernel. But when GS base is
unknown, the per-CPU base can be found from the per_cpu_offset table with a
CPU NR. The CPU NR is extracted from the limit field of the CPUNODE entry
in GDT, or by the RDPID instruction. This is a prerequisite for using
FSGSBASE in the low level entry code.

Also, add the GAS-compatible RDPID macro as binutils 2.21 does not support
it. Support is added in version 2.27.

Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
---

Changes from v7:
* No code change
* Massaged changelog by Thomas
* Used 'GS base' consistently, instead of 'GSBASE'
---
arch/x86/entry/calling.h | 34 ++++++++++++++++++++++++++++++++++
arch/x86/include/asm/inst.h | 15 +++++++++++++++
2 files changed, 49 insertions(+)

diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 515c0ce..c222302 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -6,6 +6,7 @@
#include <asm/percpu.h>
#include <asm/asm-offsets.h>
#include <asm/processor-flags.h>
+#include <asm/inst.h>

/*

@@ -347,6 +348,39 @@ For 32-bit we have the following conventions - kernel is built with
#endif
.endm

+#ifdef CONFIG_SMP
+
+/*
+ * CPU/node NR is loaded from the limit (size) field of a special segment
+ * descriptor entry in GDT.
+ */
+.macro LOAD_CPU_AND_NODE_SEG_LIMIT reg:req
+ movq $__CPUNODE_SEG, \reg
+ lsl \reg, \reg
+.endm
+
+/*
+ * Fetch the per-CPU GS base value for this processor and put it in @reg.
+ * We normally use %gs for accessing per-CPU data, but we are setting up
+ * %gs here and obviously can not use %gs itself to access per-CPU data.
+ */
+.macro GET_PERCPU_BASE reg:req
+ ALTERNATIVE \
+ "LOAD_CPU_AND_NODE_SEG_LIMIT \reg", \
+ "RDPID \reg", \
+ X86_FEATURE_RDPID
+ andq $VDSO_CPUNODE_MASK, \reg
+ movq __per_cpu_offset(, \reg, 8), \reg
+.endm
+
+#else
+
+.macro GET_PERCPU_BASE reg:req
+ movq pcpu_unit_offsets(%rip), \reg
+.endm
+
+#endif /* CONFIG_SMP */
+
/*
* This does 'call enter_from_user_mode' unless we can avoid it based on
* kernel config or using the static jump infrastructure.
diff --git a/arch/x86/include/asm/inst.h b/arch/x86/include/asm/inst.h
index f5a796d..d063841 100644
--- a/arch/x86/include/asm/inst.h
+++ b/arch/x86/include/asm/inst.h
@@ -306,6 +306,21 @@
.endif
MODRM 0xc0 movq_r64_xmm_opd1 movq_r64_xmm_opd2
.endm
+
+.macro RDPID opd
+ REG_TYPE rdpid_opd_type \opd
+ .if rdpid_opd_type == REG_TYPE_R64
+ R64_NUM rdpid_opd \opd
+ .else
+ R32_NUM rdpid_opd \opd
+ .endif
+ .byte 0xf3
+ .if rdpid_opd > 7
+ PFX_REX rdpid_opd 0
+ .endif
+ .byte 0x0f, 0xc7
+ MODRM 0xc0 rdpid_opd 0x7
+.endm
#endif

#endif
--
2.7.4
\
 
 \ /
  Last update: 2019-09-12 22:09    [W:0.217 / U:0.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site