lkml.org 
[lkml]   [2019]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 10/11] arm64: dts: layerscape: Add PCIe EP node for ls1088a
On Tue, Sep 03, 2019 at 02:01:32AM +0000, Xiaowei Bao wrote:
>
>
> > -----Original Message-----
> > From: Andrew Murray <andrew.murray@arm.com>
> > Sent: 2019年9月2日 21:06
> > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo
> > Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com; M.h.
> > Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> > Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> > gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> > arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> > <zhiqiang.hou@nxp.com>
> > Subject: Re: [PATCH v3 10/11] arm64: dts: layerscape: Add PCIe EP node for
> > ls1088a
> >
> > On Mon, Sep 02, 2019 at 11:17:15AM +0800, Xiaowei Bao wrote:
> > > Add PCIe EP node for ls1088a to support EP mode.
> > >
> > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > ---
> > > v2:
> > > - Remove the pf-offset proparty.
> > > v3:
> > > - No change.
> > >
> > > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 31
> > ++++++++++++++++++++++++++
> > > 1 file changed, 31 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > > index c676d07..da246ab 100644
> > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > > @@ -483,6 +483,17 @@
> > > status = "disabled";
> > > };
> > >
> > > + pcie_ep@3400000 {
> > > + compatible = "fsl,ls1088a-pcie-ep","fsl,ls-pcie-ep";
> >
> > Here you specify a fallback "fsl,ls-pcie-ep" that is removed by this series.
> >
> > Besides that, this looks OK.
>
> As explained, the "fsl,ls-pcie-ep" is needed, due to the u-boot will fixup the status
> property base on this compatible, I think we reserve this compatible is helpfully,
> if delate this compatible, I have to modify the code of bootloader.

I assume you mean that u-boot fixes up "fsl,ls-pcie-ep" *only* for ls1046a
devices?

Thanks,

Andrew Murray

>
> Thanks
> XIaowei
>
> >
> > Thanks,
> >
> > Andrew Murray
> >
> > > + reg = <0x00 0x03400000 0x0 0x00100000
> > > + 0x20 0x00000000 0x8 0x00000000>;
> > > + reg-names = "regs", "addr_space";
> > > + num-ib-windows = <24>;
> > > + num-ob-windows = <128>;
> > > + max-functions = /bits/ 8 <2>;
> > > + status = "disabled";
> > > + };
> > > +
> > > pcie@3500000 {
> > > compatible = "fsl,ls1088a-pcie";
> > > reg = <0x00 0x03500000 0x0 0x00100000 /* controller
> > registers */
> > > @@ -508,6 +519,16 @@
> > > status = "disabled";
> > > };
> > >
> > > + pcie_ep@3500000 {
> > > + compatible = "fsl,ls1088a-pcie-ep","fsl,ls-pcie-ep";
> > > + reg = <0x00 0x03500000 0x0 0x00100000
> > > + 0x28 0x00000000 0x8 0x00000000>;
> > > + reg-names = "regs", "addr_space";
> > > + num-ib-windows = <6>;
> > > + num-ob-windows = <8>;
> > > + status = "disabled";
> > > + };
> > > +
> > > pcie@3600000 {
> > > compatible = "fsl,ls1088a-pcie";
> > > reg = <0x00 0x03600000 0x0 0x00100000 /* controller
> > registers */
> > > @@ -533,6 +554,16 @@
> > > status = "disabled";
> > > };
> > >
> > > + pcie_ep@3600000 {
> > > + compatible = "fsl,ls1088a-pcie-ep","fsl,ls-pcie-ep";
> > > + reg = <0x00 0x03600000 0x0 0x00100000
> > > + 0x30 0x00000000 0x8 0x00000000>;
> > > + reg-names = "regs", "addr_space";
> > > + num-ib-windows = <6>;
> > > + num-ob-windows = <8>;
> > > + status = "disabled";
> > > + };
> > > +
> > > smmu: iommu@5000000 {
> > > compatible = "arm,mmu-500";
> > > reg = <0 0x5000000 0 0x800000>;
> > > --
> > > 2.9.5
> > >

\
 
 \ /
  Last update: 2019-09-12 15:03    [W:0.070 / U:1.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site