lkml.org 
[lkml]   [2019]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] PCI: pciehp: Avoid returning prematurely from sysfs requests
From
Date
Hi,

On 8/9/19 3:28 AM, Lukas Wunner wrote:
> A sysfs request to enable or disable a PCIe hotplug slot should not
> return before it has been carried out. That is sought to be achieved
> by waiting until the controller's "pending_events" have been cleared.
>
> However the IRQ thread pciehp_ist() clears the "pending_events" before
> it acts on them. If pciehp_sysfs_enable_slot() / _disable_slot() happen
> to check the "pending_events" after they have been cleared but while
> pciehp_ist() is still running, the functions may return prematurely
> with an incorrect return value.
Can this be fixed by changing the sequence of clearing the
pending_events in pciehp_ist() ?
>
> Fix by introducing an "ist_running" flag which must be false before a
> sysfs request is allowed to return.
>
> Fixes: 32a8cef274fe ("PCI: pciehp: Enable/disable exclusively from IRQ thread")
> Link: https://lore.kernel.org/linux-pci/1562226638-54134-1-git-send-email-wangxiongfeng2@huawei.com
> Reported-and-tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
> Signed-off-by: Lukas Wunner <lukas@wunner.de>
> Cc: stable@vger.kernel.org # v4.19+
> ---
> drivers/pci/hotplug/pciehp.h | 2 ++
> drivers/pci/hotplug/pciehp_ctrl.c | 6 ++++--
> drivers/pci/hotplug/pciehp_hpc.c | 2 ++
> 3 files changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
> index 8c51a04b8083..e316bde45c7b 100644
> --- a/drivers/pci/hotplug/pciehp.h
> +++ b/drivers/pci/hotplug/pciehp.h
> @@ -72,6 +72,7 @@ extern int pciehp_poll_time;
> * @reset_lock: prevents access to the Data Link Layer Link Active bit in the
> * Link Status register and to the Presence Detect State bit in the Slot
> * Status register during a slot reset which may cause them to flap
> + * @ist_running: flag to keep user request waiting while IRQ thread is running
> * @request_result: result of last user request submitted to the IRQ thread
> * @requester: wait queue to wake up on completion of user request,
> * used for synchronous slot enable/disable request via sysfs
> @@ -101,6 +102,7 @@ struct controller {
>
> struct hotplug_slot hotplug_slot; /* hotplug core interface */
> struct rw_semaphore reset_lock;
> + unsigned int ist_running;
> int request_result;
> wait_queue_head_t requester;
> };
> diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
> index 631ced0ab28a..1ce9ce335291 100644
> --- a/drivers/pci/hotplug/pciehp_ctrl.c
> +++ b/drivers/pci/hotplug/pciehp_ctrl.c
> @@ -368,7 +368,8 @@ int pciehp_sysfs_enable_slot(struct hotplug_slot *hotplug_slot)
> ctrl->request_result = -ENODEV;
> pciehp_request(ctrl, PCI_EXP_SLTSTA_PDC);
> wait_event(ctrl->requester,
> - !atomic_read(&ctrl->pending_events));
> + !atomic_read(&ctrl->pending_events) &&
> + !ctrl->ist_running);
> return ctrl->request_result;
> case POWERON_STATE:
> ctrl_info(ctrl, "Slot(%s): Already in powering on state\n",
> @@ -401,7 +402,8 @@ int pciehp_sysfs_disable_slot(struct hotplug_slot *hotplug_slot)
> mutex_unlock(&ctrl->state_lock);
> pciehp_request(ctrl, DISABLE_SLOT);
> wait_event(ctrl->requester,
> - !atomic_read(&ctrl->pending_events));
> + !atomic_read(&ctrl->pending_events) &&
> + !ctrl->ist_running);
> return ctrl->request_result;
> case POWEROFF_STATE:
> ctrl_info(ctrl, "Slot(%s): Already in powering off state\n",
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
> index bd990e3371e3..9e2d7688e8cc 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -608,6 +608,7 @@ static irqreturn_t pciehp_ist(int irq, void *dev_id)
> irqreturn_t ret;
> u32 events;
>
> + ctrl->ist_running = true;
> pci_config_pm_runtime_get(pdev);
>
> /* rerun pciehp_isr() if the port was inaccessible on interrupt */
> @@ -654,6 +655,7 @@ static irqreturn_t pciehp_ist(int irq, void *dev_id)
> up_read(&ctrl->reset_lock);
>
> pci_config_pm_runtime_put(pdev);
> + ctrl->ist_running = false;
> wake_up(&ctrl->requester);
> return IRQ_HANDLED;
> }

--
Sathyanarayanan Kuppuswamy
Linux kernel developer

\
 
 \ /
  Last update: 2019-08-09 19:32    [W:0.153 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site