lkml.org 
[lkml]   [2019]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/4] dt-bindings: iio: adc: Add AD7606B ADC documentation
Date
Documentation for AD7606B Analog to Digital Converter and software
mode was added.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
---
Changes in v2:
-nothing changed

Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 509dbe9c84d2..2afe31747a70 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -13,6 +13,7 @@ maintainers:
description: |
Analog Devices AD7606 Simultaneous Sampling ADC
https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf

properties:
@@ -22,6 +23,7 @@ properties:
- adi,ad7606-8
- adi,ad7606-6
- adi,ad7606-4
+ - adi,ad7606b
- adi,ad7616

reg:
@@ -87,7 +89,7 @@ properties:

adi,sw-mode:
description:
- Software mode of operation, so far available only for ad7616.
+ Software mode of operation, so far available only for ad7616 and ad7606B.
It is enabled when all three oversampling mode pins are connected to
high level. The device is configured by the corresponding registers. If the
adi,oversampling-ratio-gpios property is defined, then the driver will set the
--
2.17.1
\
 
 \ /
  Last update: 2019-08-07 15:57    [W:0.086 / U:4.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site