lkml.org 
[lkml]   [2019]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH 2/5] firmware: arm_scmi: Make use SCMI v2.0 fastchannel for performance protocol
On Fri, 26 Jul 2019 at 16:00, Sudeep Holla <sudeep.holla@arm.com> wrote:
>
> SCMI v2.0 adds support for "FastChannel" which do not use a message
> header as they are specialized for a single message.
>
> Only PERFORMANCE_LIMITS_{SET,GET} and PERFORMANCE_LEVEL_{SET,GET}
> commands are supported over fastchannels. As they are optional, they
> need to be discovered by PERFORMANCE_DESCRIBE_FASTCHANNEL command.
> Further {LIMIT,LEVEL}_SET commands can have optional doorbell support.
>
> Add support for making use of these fastchannels.
>
> Cc: Ionela Voinescu <Ionela.Voinescu@arm.com>
> Cc: Chris Redpath <Chris.Redpath@arm.com>
> Cc: Quentin Perret <Quentin.Perret@arm.com>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
> drivers/firmware/arm_scmi/perf.c | 104 +++++++++++++++++++++++++++++--
> 1 file changed, 100 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
> index 6cce3e82e81e..b9144efbd6fb 100644
> --- a/drivers/firmware/arm_scmi/perf.c
> +++ b/drivers/firmware/arm_scmi/perf.c
> @@ -8,6 +8,7 @@
> #include <linux/bits.h>
> #include <linux/of.h>
> #include <linux/io.h>
> +#include <linux/io-64-nonatomic-hi-lo.h>
> #include <linux/platform_device.h>
> #include <linux/pm_opp.h>
> #include <linux/sort.h>
> @@ -293,7 +294,42 @@ scmi_perf_describe_levels_get(const struct scmi_handle *handle, u32 domain,
> return ret;
> }
>
> -static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 domain,
> +#define SCMI_PERF_FC_RING_DB(doorbell, w) \

Suggest to reformat into a macro style:
#define SCMI_PERF_FC_RING_DB(doorbell, w) \
do { \
(...) \
} while (0)

> +{ \
> + u##w val = 0; \
> + struct scmi_fc_db_info *db = doorbell; \
> + \
> + if ((db)->mask) \

remove parentheses. I would say, could simply remove `if (db->mask)` here.

> + val = ioread##w(db->addr) & db->mask; \
> + iowrite##w((u##w)db->set | val, db->addr); \
> +}
> +
> +static void scmi_perf_fc_ring_db(struct scmi_fc_db_info *db)
> +{
> + if (!db || !db->addr)
> + return;
> +
> + if (db->width == 1)
> + SCMI_PERF_FC_RING_DB(db, 8)
> + else if (db->width == 2)
> + SCMI_PERF_FC_RING_DB(db, 16)
> + else if (db->width == 4)
> + SCMI_PERF_FC_RING_DB(db, 32)
> + else /* db->width == 8 */
> +#ifdef CONFIG_64BIT
> + SCMI_PERF_FC_RING_DB(db, 64)
> +#else
> + {
> + u64 val = 0;
> +
> + if (db->mask)
> + val = ioread64_hi_lo(db->addr) & db->mask;
> + iowrite64_hi_lo(db->set, db->addr);

Is `value` missing here?
Why not using SCMI_PERF_FC_RING_DB(db, 64) here?



> + }
> +#endif
> +}
> +
> +static int scmi_perf_mb_limits_set(const struct scmi_handle *handle, u32 domain,
> u32 max_perf, u32 min_perf)
> {
> int ret;
> @@ -316,7 +352,23 @@ static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 domain,
> return ret;
> }
>
> -static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain,
> +static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 domain,
> + u32 max_perf, u32 min_perf)
> +{
> + struct scmi_perf_info *pi = handle->perf_priv;
> + struct perf_dom_info *dom = pi->dom_info + domain;
> +
> + if (dom->fc_info && dom->fc_info->limit_set_addr) {
> + iowrite32(max_perf, dom->fc_info->limit_set_addr);
> + iowrite32(min_perf, dom->fc_info->limit_set_addr + 4);
> + scmi_perf_fc_ring_db(dom->fc_info->limit_set_db);
> + return 0;
> + }
> +
> + return scmi_perf_mb_limits_set(handle, domain, max_perf, min_perf);
> +}
> +
> +static int scmi_perf_mb_limits_get(const struct scmi_handle *handle, u32 domain,
> u32 *max_perf, u32 *min_perf)
> {
> int ret;
> @@ -342,7 +394,22 @@ static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain,
> return ret;
> }
>
> -static int scmi_perf_level_set(const struct scmi_handle *handle, u32 domain,
> +static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain,
> + u32 *max_perf, u32 *min_perf)
> +{
> + struct scmi_perf_info *pi = handle->perf_priv;
> + struct perf_dom_info *dom = pi->dom_info + domain;
> +
> + if (dom->fc_info && dom->fc_info->limit_get_addr) {
> + *max_perf = ioread32(dom->fc_info->limit_get_addr);
> + *min_perf = ioread32(dom->fc_info->limit_get_addr + 4);
> + return 0;
> + }
> +
> + return scmi_perf_mb_limits_get(handle, domain, max_perf, min_perf);
> +}
> +
> +static int scmi_perf_mb_level_set(const struct scmi_handle *handle, u32 domain,
> u32 level, bool poll)
> {
> int ret;
> @@ -365,7 +432,22 @@ static int scmi_perf_level_set(const struct scmi_handle *handle, u32 domain,
> return ret;
> }
>
> -static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain,
> +static int scmi_perf_level_set(const struct scmi_handle *handle, u32 domain,
> + u32 level, bool poll)
> +{
> + struct scmi_perf_info *pi = handle->perf_priv;
> + struct perf_dom_info *dom = pi->dom_info + domain;
> +
> + if (dom->fc_info && dom->fc_info->level_set_addr) {
> + iowrite32(level, dom->fc_info->level_set_addr);
> + scmi_perf_fc_ring_db(dom->fc_info->level_set_db);
> + return 0;
> + }
> +
> + return scmi_perf_mb_level_set(handle, domain, level, poll);
> +}
> +
> +static int scmi_perf_mb_level_get(const struct scmi_handle *handle, u32 domain,
> u32 *level, bool poll)
> {
> int ret;
> @@ -387,6 +469,20 @@ static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain,
> return ret;
> }
>
> +static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain,
> + u32 *level, bool poll)
> +{
> + struct scmi_perf_info *pi = handle->perf_priv;
> + struct perf_dom_info *dom = pi->dom_info + domain;
> +
> + if (dom->fc_info && dom->fc_info->level_get_addr) {
> + *level = ioread32(dom->fc_info->level_get_addr);
> + return 0;
> + }
> +
> + return scmi_perf_mb_level_get(handle, domain, level, poll);
> +}
> +
> static bool scmi_perf_fc_size_is_valid(u32 msg, u32 size)
> {
> if ((msg == PERF_LEVEL_GET || msg == PERF_LEVEL_SET) && size == 4)
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-08-05 15:26    [W:0.069 / U:7.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site