lkml.org 
[lkml]   [2019]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v6 4/4] tpm: tpm_tis_spi: Support cr50 devices
Date
Am Freitag, 30. August 2019, 00:41:10 CEST schrieb Stephen Boyd:
> From: Andrey Pronin <apronin@chromium.org>
>
> Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50
> firmware. The firmware running on the currently supported H1 Secure
> Microcontroller requires a special driver to handle its specifics:
>
> - need to ensure a certain delay between SPI transactions, or else
> the chip may miss some part of the next transaction
> - if there is no SPI activity for some time, it may go to sleep,
> and needs to be waken up before sending further commands
> - access to vendor-specific registers
>
> Cr50 firmware has a requirement to wait for the TPM to wakeup before
> sending commands over the SPI bus. Otherwise, the firmware could be in
> deep sleep and not respond. The method to wait for the device to wakeup
> is slightly different than the usual flow control mechanism described in
> the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we
> start a SPI transfer so we can keep track of the last time the TPM
> driver accessed the SPI bus to support the flow control mechanism.
>
> Split the cr50 logic off into a different file to keep it out of the
> normal code flow of the existing SPI driver while making it all part of
> the same module when the code is optionally compiled into the same
> module. Export a new function, tpm_tis_spi_init(), and the associated
> read/write/transfer APIs so that we can do this. Make the cr50 code wrap
> the tpm_tis_spi_phy struct with its own struct to override the behavior
> of tpm_tis_spi_transfer() by supplying a custom flow control hook. This
> shares the most code between the core driver and the cr50 support
> without combining everything into the core driver or exporting module
> symbols.
>
> Signed-off-by: Andrey Pronin <apronin@chromium.org>
> Cc: Andrey Pronin <apronin@chromium.org>
> Cc: Duncan Laurie <dlaurie@chromium.org>
> Cc: Jason Gunthorpe <jgg@ziepe.ca>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Guenter Roeck <groeck@chromium.org>
> Cc: Alexander Steffen <Alexander.Steffen@infineon.com>
> Cc: Heiko Stuebner <heiko@sntech.de>
> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop
> suspended bit and remove ifdef checks in cr50.h, migrate to functions
> exported in tpm_tis_spi.h, combine into one module instead of two]
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>

This variant breaks building the tpm as a module:


WARNING: modpost: missing MODULE_LICENSE() in drivers/char/tpm/cr50_spi.o
see include/linux/module.h for more information
ERROR: "tpm_tis_spi_write32" [drivers/char/tpm/cr50_spi.ko] undefined!
ERROR: "tpm_tis_spi_read32" [drivers/char/tpm/cr50_spi.ko] undefined!
ERROR: "tpm_tis_spi_read16" [drivers/char/tpm/cr50_spi.ko] undefined!
ERROR: "tpm_tis_spi_init" [drivers/char/tpm/cr50_spi.ko] undefined!
ERROR: "tpm_tis_spi_transfer" [drivers/char/tpm/cr50_spi.ko] undefined!
ERROR: "tpm_tis_spi_resume" [drivers/char/tpm/tpm_tis_spi.ko] undefined!
ERROR: "cr50_spi_probe" [drivers/char/tpm/tpm_tis_spi.ko] undefined!
make[2]: *** [../scripts/Makefile.modpost:103: modules-modpost] Fehler 1
make[1]: *** [/home/devel/hstuebner/00_git-repos/linux-rockchip/Makefile:1302: modules] Fehler 2
make[1]: Verzeichnis „/home/devel/hstuebner/00_git-repos/linux-rockchip/_build-arm64“ wird verlassen
make: *** [Makefile:179: sub-make] Fehler 2


After adding a dummy MODULE_LICENSE I end up with:

ERROR: "tpm_tis_spi_write32" [drivers/char/tpm/cr50_spi.ko] undefined!
ERROR: "tpm_tis_spi_read32" [drivers/char/tpm/cr50_spi.ko] undefined!
ERROR: "tpm_tis_spi_read16" [drivers/char/tpm/cr50_spi.ko] undefined!
ERROR: "tpm_tis_spi_init" [drivers/char/tpm/cr50_spi.ko] undefined!
ERROR: "tpm_tis_spi_transfer" [drivers/char/tpm/cr50_spi.ko] undefined!
ERROR: "tpm_tis_spi_resume" [drivers/char/tpm/tpm_tis_spi.ko] undefined!
ERROR: "cr50_spi_probe" [drivers/char/tpm/tpm_tis_spi.ko] undefined!


So building things as modules this way clearly is not working. Going back
to the previous approach makes the module happy again, aka:

diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
index 6ff135d6f008..477fcddbff8c 100644
--- a/drivers/char/tpm/Makefile
+++ b/drivers/char/tpm/Makefile
@@ -21,7 +21,9 @@ tpm-$(CONFIG_EFI) += eventlog/efi.o
tpm-$(CONFIG_OF) += eventlog/of.o
obj-$(CONFIG_TCG_TIS_CORE) += tpm_tis_core.o
obj-$(CONFIG_TCG_TIS) += tpm_tis.o
-obj-$(CONFIG_TCG_TIS_SPI) += tpm_tis_spi.o cr50_spi.o
+obj-$(CONFIG_TCG_TIS_SPI) += tpm_tis_spi_mod.o
+tpm_tis_spi_mod-y := tpm_tis_spi.o
+tpm_tis_spi_mod-y += cr50_spi.o
obj-$(CONFIG_TCG_TIS_I2C_ATMEL) += tpm_i2c_atmel.o
obj-$(CONFIG_TCG_TIS_I2C_INFINEON) += tpm_i2c_infineon.o
obj-$(CONFIG_TCG_TIS_I2C_NUVOTON) += tpm_i2c_nuvoton.o



> ---
> drivers/char/tpm/Makefile | 2 +-
> drivers/char/tpm/cr50_spi.c | 321 +++++++++++++++++++++++++++++++++
> drivers/char/tpm/tpm_tis_spi.c | 78 ++++----
> drivers/char/tpm/tpm_tis_spi.h | 46 +++++
> 4 files changed, 415 insertions(+), 32 deletions(-)
> create mode 100644 drivers/char/tpm/cr50_spi.c
> create mode 100644 drivers/char/tpm/tpm_tis_spi.h
>
> diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
> index a01c4cab902a..6ff135d6f008 100644
> --- a/drivers/char/tpm/Makefile
> +++ b/drivers/char/tpm/Makefile
> @@ -21,7 +21,7 @@ tpm-$(CONFIG_EFI) += eventlog/efi.o
> tpm-$(CONFIG_OF) += eventlog/of.o
> obj-$(CONFIG_TCG_TIS_CORE) += tpm_tis_core.o
> obj-$(CONFIG_TCG_TIS) += tpm_tis.o
> -obj-$(CONFIG_TCG_TIS_SPI) += tpm_tis_spi.o
> +obj-$(CONFIG_TCG_TIS_SPI) += tpm_tis_spi.o cr50_spi.o
> obj-$(CONFIG_TCG_TIS_I2C_ATMEL) += tpm_i2c_atmel.o
> obj-$(CONFIG_TCG_TIS_I2C_INFINEON) += tpm_i2c_infineon.o
> obj-$(CONFIG_TCG_TIS_I2C_NUVOTON) += tpm_i2c_nuvoton.o
> diff --git a/drivers/char/tpm/cr50_spi.c b/drivers/char/tpm/cr50_spi.c
> new file mode 100644
> index 000000000000..187a023c2556
> --- /dev/null
> +++ b/drivers/char/tpm/cr50_spi.c
> @@ -0,0 +1,321 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2016 Google, Inc
> + *
> + * This device driver implements a TCG PTP FIFO interface over SPI for chips
> + * with Cr50 firmware.
> + * It is based on tpm_tis_spi driver by Peter Huewe and Christophe Ricard.
> + */
> +
> +#include <linux/completion.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/pm.h>
> +#include <linux/spi/spi.h>
> +#include <linux/wait.h>
> +
> +#include "tpm_tis_core.h"
> +#include "tpm_tis_spi.h"
> +
> +/*
> + * Cr50 timing constants:
> + * - can go to sleep not earlier than after CR50_SLEEP_DELAY_MSEC.
> + * - needs up to CR50_WAKE_START_DELAY_USEC to wake after sleep.
> + * - requires waiting for "ready" IRQ, if supported; or waiting for at least
> + * CR50_NOIRQ_ACCESS_DELAY_MSEC between transactions, if IRQ is not supported.
> + * - waits for up to CR50_FLOW_CONTROL for flow control 'ready' indication.
> + */
> +#define CR50_SLEEP_DELAY_MSEC 1000
> +#define CR50_WAKE_START_DELAY_USEC 1000
> +#define CR50_NOIRQ_ACCESS_DELAY msecs_to_jiffies(2)
> +#define CR50_READY_IRQ_TIMEOUT msecs_to_jiffies(TPM2_TIMEOUT_A)
> +#define CR50_FLOW_CONTROL msecs_to_jiffies(TPM2_TIMEOUT_A)
> +#define MAX_IRQ_CONFIRMATION_ATTEMPTS 3
> +
> +#define TPM_CR50_FW_VER(l) (0x0f90 | ((l) << 12))
> +#define TPM_CR50_MAX_FW_VER_LEN 64
> +
> +struct cr50_spi_phy {
> + struct tpm_tis_spi_phy spi_phy;
> +
> + struct mutex time_track_mutex;
> + unsigned long last_access;
> +
> + unsigned long access_delay;
> +
> + unsigned int irq_confirmation_attempt;
> + bool irq_needs_confirmation;
> + bool irq_confirmed;
> +};
> +
> +static inline struct cr50_spi_phy *to_cr50_spi_phy(struct tpm_tis_spi_phy *phy)
> +{
> + return container_of(phy, struct cr50_spi_phy, spi_phy);
> +}
> +
> +/*
> + * The cr50 interrupt handler just signals waiting threads that the
> + * interrupt was asserted. It does not do any processing triggered
> + * by interrupts but is instead used to avoid fixed delays.
> + */
> +static irqreturn_t cr50_spi_irq_handler(int dummy, void *dev_id)
> +{
> + struct cr50_spi_phy *cr50_phy = dev_id;
> +
> + cr50_phy->irq_confirmed = true;
> + complete(&cr50_phy->spi_phy.ready);
> +
> + return IRQ_HANDLED;
> +}
> +
> +/*
> + * Cr50 needs to have at least some delay between consecutive
> + * transactions. Make sure we wait.
> + */
> +static void cr50_ensure_access_delay(struct cr50_spi_phy *phy)
> +{
> + unsigned long allowed_access = phy->last_access + phy->access_delay;
> + unsigned long time_now = jiffies;
> + struct device *dev = &phy->spi_phy.spi_device->dev;
> +
> + /*
> + * Note: There is a small chance, if Cr50 is not accessed in a few days,
> + * that time_in_range will not provide the correct result after the wrap
> + * around for jiffies. In this case, we'll have an unneeded short delay,
> + * which is fine.
> + */
> + if (time_in_range_open(time_now, phy->last_access, allowed_access)) {
> + unsigned long remaining, timeout = allowed_access - time_now;
> +
> + remaining = wait_for_completion_timeout(&phy->spi_phy.ready,
> + timeout);
> + if (!remaining && phy->irq_confirmed)
> + dev_warn(dev, "Timeout waiting for TPM ready IRQ\n");
> + }
> +
> + if (phy->irq_needs_confirmation) {
> + unsigned int attempt = ++phy->irq_confirmation_attempt;
> +
> + if (phy->irq_confirmed) {
> + phy->irq_needs_confirmation = false;
> + phy->access_delay = CR50_READY_IRQ_TIMEOUT;
> + dev_info(dev, "TPM ready IRQ confirmed on attempt %u\n",
> + attempt);
> + } else if (attempt > MAX_IRQ_CONFIRMATION_ATTEMPTS) {
> + phy->irq_needs_confirmation = false;
> + dev_warn(dev, "IRQ not confirmed - will use delays\n");
> + }
> + }
> +}
> +
> +/*
> + * Cr50 might go to sleep if there is no SPI activity for some time and
> + * miss the first few bits/bytes on the bus. In such case, wake it up
> + * by asserting CS and give it time to start up.
> + */
> +static bool cr50_needs_waking(struct cr50_spi_phy *phy)
> +{
> + /*
> + * Note: There is a small chance, if Cr50 is not accessed in a few days,
> + * that time_in_range will not provide the correct result after the wrap
> + * around for jiffies. In this case, we'll probably timeout or read
> + * incorrect value from TPM_STS and just retry the operation.
> + */
> + return !time_in_range_open(jiffies, phy->last_access,
> + phy->spi_phy.wake_after);
> +}
> +
> +static void cr50_wake_if_needed(struct cr50_spi_phy *cr50_phy)
> +{
> + struct tpm_tis_spi_phy *phy = &cr50_phy->spi_phy;
> +
> + if (cr50_needs_waking(cr50_phy)) {
> + /* Assert CS, wait 1 msec, deassert CS */
> + struct spi_transfer spi_cs_wake = { .delay_usecs = 1000 };
> +
> + spi_sync_transfer(phy->spi_device, &spi_cs_wake, 1);
> + /* Wait for it to fully wake */
> + usleep_range(CR50_WAKE_START_DELAY_USEC,
> + CR50_WAKE_START_DELAY_USEC * 2);
> + }
> +
> + /* Reset the time when we need to wake Cr50 again */
> + phy->wake_after = jiffies + msecs_to_jiffies(CR50_SLEEP_DELAY_MSEC);
> +}
> +
> +/*
> + * Flow control: clock the bus and wait for cr50 to set LSB before
> + * sending/receiving data. TCG PTP spec allows it to happen during
> + * the last byte of header, but cr50 never does that in practice,
> + * and earlier versions had a bug when it was set too early, so don't
> + * check for it during header transfer.
> + */
> +static int cr50_spi_flow_control(struct tpm_tis_spi_phy *phy,
> + struct spi_transfer *spi_xfer)
> +{
> + struct device *dev = &phy->spi_device->dev;
> + unsigned long timeout = jiffies + CR50_FLOW_CONTROL;
> + struct spi_message m;
> + int ret;
> +
> + spi_xfer->len = 1;
> +
> + do {
> + spi_message_init(&m);
> + spi_message_add_tail(spi_xfer, &m);
> + ret = spi_sync_locked(phy->spi_device, &m);
> + if (ret < 0)
> + return ret;
> +
> + if (time_after(jiffies, timeout)) {
> + dev_warn(dev, "Timeout during flow control\n");
> + return -EBUSY;
> + }
> + } while (!(phy->iobuf[0] & 0x01));
> +
> + return 0;
> +}
> +
> +static int tpm_tis_spi_cr50_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
> + u8 *in, const u8 *out)
> +{
> + struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data);
> + struct cr50_spi_phy *cr50_phy = to_cr50_spi_phy(phy);
> + int ret;
> +
> + mutex_lock(&cr50_phy->time_track_mutex);
> + /*
> + * Do this outside of spi_bus_lock in case cr50 is not the
> + * only device on that spi bus.
> + */
> + cr50_ensure_access_delay(cr50_phy);
> + cr50_wake_if_needed(cr50_phy);
> +
> + ret = tpm_tis_spi_transfer(data, addr, len, in, out);
> +
> + cr50_phy->last_access = jiffies;
> + mutex_unlock(&cr50_phy->time_track_mutex);
> +
> + return ret;
> +}
> +
> +static int tpm_tis_spi_cr50_read_bytes(struct tpm_tis_data *data, u32 addr,
> + u16 len, u8 *result)
> +{
> + return tpm_tis_spi_cr50_transfer(data, addr, len, result, NULL);
> +}
> +
> +static int tpm_tis_spi_cr50_write_bytes(struct tpm_tis_data *data, u32 addr,
> + u16 len, const u8 *value)
> +{
> + return tpm_tis_spi_cr50_transfer(data, addr, len, NULL, value);
> +}
> +
> +static const struct tpm_tis_phy_ops tpm_spi_cr50_phy_ops = {
> + .read_bytes = tpm_tis_spi_cr50_read_bytes,
> + .write_bytes = tpm_tis_spi_cr50_write_bytes,
> + .read16 = tpm_tis_spi_read16,
> + .read32 = tpm_tis_spi_read32,
> + .write32 = tpm_tis_spi_write32,
> +};
> +
> +static void cr50_print_fw_version(struct tpm_tis_data *data)
> +{
> + struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data);
> + int i, len = 0;
> + char fw_ver[TPM_CR50_MAX_FW_VER_LEN + 1];
> + char fw_ver_block[4];
> +
> + /*
> + * Write anything to TPM_CR50_FW_VER to start from the beginning
> + * of the version string
> + */
> + tpm_tis_write8(data, TPM_CR50_FW_VER(data->locality), 0);
> +
> + /* Read the string, 4 bytes at a time, until we get '\0' */
> + do {
> + tpm_tis_read_bytes(data, TPM_CR50_FW_VER(data->locality), 4,
> + fw_ver_block);
> + for (i = 0; i < 4 && fw_ver_block[i]; ++len, ++i)
> + fw_ver[len] = fw_ver_block[i];
> + } while (i == 4 && len < TPM_CR50_MAX_FW_VER_LEN);
> + fw_ver[len] = '\0';
> +
> + dev_info(&phy->spi_device->dev, "Cr50 firmware version: %s\n", fw_ver);
> +}
> +
> +int cr50_spi_probe(struct spi_device *spi)
> +{
> + struct tpm_tis_spi_phy *phy;
> + struct cr50_spi_phy *cr50_phy;
> + int ret;
> + struct tpm_chip *chip;
> +
> + cr50_phy = devm_kzalloc(&spi->dev, sizeof(*cr50_phy), GFP_KERNEL);
> + if (!cr50_phy)
> + return -ENOMEM;
> +
> + phy = &cr50_phy->spi_phy;
> + phy->flow_control = cr50_spi_flow_control;
> + phy->wake_after = jiffies;
> + init_completion(&phy->ready);
> +
> + cr50_phy->access_delay = CR50_NOIRQ_ACCESS_DELAY;
> + cr50_phy->last_access = jiffies;
> + mutex_init(&cr50_phy->time_track_mutex);
> +
> + if (spi->irq > 0) {
> + ret = devm_request_irq(&spi->dev, spi->irq, cr50_spi_irq_handler,
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + "cr50_spi", cr50_phy);
> + if (ret < 0) {
> + if (ret == -EPROBE_DEFER)
> + return ret;
> + dev_warn(&spi->dev, "Requesting IRQ %d failed: %d\n",
> + spi->irq, ret);
> + /*
> + * This is not fatal, the driver will fall back to
> + * delays automatically, since ready will never
> + * be completed without a registered irq handler.
> + * So, just fall through.
> + */
> + } else {
> + /*
> + * IRQ requested, let's verify that it is actually
> + * triggered, before relying on it.
> + */
> + cr50_phy->irq_needs_confirmation = true;
> + }
> + } else {
> + dev_warn(&spi->dev,
> + "No IRQ - will use delays between transactions.\n");
> + }
> +
> + ret = tpm_tis_spi_init(spi, phy, -1, &tpm_spi_cr50_phy_ops);
> + if (ret)
> + return ret;
> +
> + cr50_print_fw_version(&phy->priv);
> +
> + chip = dev_get_drvdata(&spi->dev);
> + chip->flags |= TPM_CHIP_FLAG_FIRMWARE_POWER_MANAGED;
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +int tpm_tis_spi_resume(struct device *dev)
> +{
> + struct tpm_chip *chip = dev_get_drvdata(dev);
> + struct tpm_tis_data *data = dev_get_drvdata(&chip->dev);
> + struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data);
> + /*
> + * Jiffies not increased during suspend, so we need to reset
> + * the time to wake Cr50 after resume.
> + */
> + phy->wake_after = jiffies;
> +
> + return tpm_tis_resume(dev);
> +}
> +#endif
> diff --git a/drivers/char/tpm/tpm_tis_spi.c b/drivers/char/tpm/tpm_tis_spi.c
> index b3ed85671dd8..5e4253e7c080 100644
> --- a/drivers/char/tpm/tpm_tis_spi.c
> +++ b/drivers/char/tpm/tpm_tis_spi.c
> @@ -20,6 +20,7 @@
> * Dorn and Kyleen Hall and Jarko Sakkinnen.
> */
>
> +#include <linux/completion.h>
> #include <linux/init.h>
> #include <linux/module.h>
> #include <linux/moduleparam.h>
> @@ -31,27 +32,16 @@
>
> #include <linux/spi/spi.h>
> #include <linux/gpio.h>
> +#include <linux/of_device.h>
> #include <linux/of_irq.h>
> #include <linux/of_gpio.h>
> #include <linux/tpm.h>
> #include "tpm.h"
> #include "tpm_tis_core.h"
> +#include "tpm_tis_spi.h"
>
> #define MAX_SPI_FRAMESIZE 64
>
> -struct tpm_tis_spi_phy {
> - struct tpm_tis_data priv;
> - struct spi_device *spi_device;
> - int (*flow_control)(struct tpm_tis_spi_phy *phy,
> - struct spi_transfer *xfer);
> - u8 *iobuf;
> -};
> -
> -static inline struct tpm_tis_spi_phy *to_tpm_tis_spi_phy(struct tpm_tis_data *data)
> -{
> - return container_of(data, struct tpm_tis_spi_phy, priv);
> -}
> -
> /*
> * TCG SPI flow control is documented in section 6.4 of the spec[1]. In short,
> * keep trying to read from the device until MISO goes high indicating the
> @@ -87,8 +77,8 @@ static int tpm_tis_spi_flow_control(struct tpm_tis_spi_phy *phy,
> return 0;
> }
>
> -static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
> - u8 *in, const u8 *out)
> +int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
> + u8 *in, const u8 *out)
> {
> struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data);
> int ret = 0;
> @@ -136,6 +126,7 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
>
> spi_message_init(&m);
> spi_message_add_tail(&spi_xfer, &m);
> + reinit_completion(&phy->ready);
> ret = spi_sync_locked(phy->spi_device, &m);
> if (ret < 0)
> goto exit;
> @@ -165,7 +156,7 @@ static int tpm_tis_spi_write_bytes(struct tpm_tis_data *data, u32 addr,
> return tpm_tis_spi_transfer(data, addr, len, NULL, value);
> }
>
> -static int tpm_tis_spi_read16(struct tpm_tis_data *data, u32 addr, u16 *result)
> +int tpm_tis_spi_read16(struct tpm_tis_data *data, u32 addr, u16 *result)
> {
> __le16 result_le;
> int rc;
> @@ -178,7 +169,7 @@ static int tpm_tis_spi_read16(struct tpm_tis_data *data, u32 addr, u16 *result)
> return rc;
> }
>
> -static int tpm_tis_spi_read32(struct tpm_tis_data *data, u32 addr, u32 *result)
> +int tpm_tis_spi_read32(struct tpm_tis_data *data, u32 addr, u32 *result)
> {
> __le32 result_le;
> int rc;
> @@ -191,7 +182,7 @@ static int tpm_tis_spi_read32(struct tpm_tis_data *data, u32 addr, u32 *result)
> return rc;
> }
>
> -static int tpm_tis_spi_write32(struct tpm_tis_data *data, u32 addr, u32 value)
> +int tpm_tis_spi_write32(struct tpm_tis_data *data, u32 addr, u32 value)
> {
> __le32 value_le;
> int rc;
> @@ -203,6 +194,18 @@ static int tpm_tis_spi_write32(struct tpm_tis_data *data, u32 addr, u32 value)
> return rc;
> }
>
> +int tpm_tis_spi_init(struct spi_device *spi, struct tpm_tis_spi_phy *phy,
> + int irq, const struct tpm_tis_phy_ops *phy_ops)
> +{
> + phy->iobuf = devm_kmalloc(&spi->dev, MAX_SPI_FRAMESIZE, GFP_KERNEL);
> + if (!phy->iobuf)
> + return -ENOMEM;
> +
> + phy->spi_device = spi;
> +
> + return tpm_tis_core_init(&spi->dev, &phy->priv, irq, phy_ops, NULL);
> +}
> +
> static const struct tpm_tis_phy_ops tpm_spi_phy_ops = {
> .read_bytes = tpm_tis_spi_read_bytes,
> .write_bytes = tpm_tis_spi_write_bytes,
> @@ -221,11 +224,6 @@ static int tpm_tis_spi_probe(struct spi_device *dev)
> if (!phy)
> return -ENOMEM;
>
> - phy->spi_device = dev;
> -
> - phy->iobuf = devm_kmalloc(&dev->dev, MAX_SPI_FRAMESIZE, GFP_KERNEL);
> - if (!phy->iobuf)
> - return -ENOMEM;
> phy->flow_control = tpm_tis_spi_flow_control;
>
> /* If the SPI device has an IRQ then use that */
> @@ -234,11 +232,27 @@ static int tpm_tis_spi_probe(struct spi_device *dev)
> else
> irq = -1;
>
> - return tpm_tis_core_init(&dev->dev, &phy->priv, irq, &tpm_spi_phy_ops,
> - NULL);
> + init_completion(&phy->ready);
> + return tpm_tis_spi_init(dev, phy, irq, &tpm_spi_phy_ops);
> +}
> +
> +typedef int (*tpm_tis_spi_probe_func)(struct spi_device *);
> +
> +static int tpm_tis_spi_driver_probe(struct spi_device *spi)
> +{
> + const struct spi_device_id *spi_dev_id = spi_get_device_id(spi);
> + tpm_tis_spi_probe_func probe_func;
> +
> + probe_func = of_device_get_match_data(&spi->dev);
> + if (!probe_func && spi_dev_id)
> + probe_func = (tpm_tis_spi_probe_func)spi_dev_id->driver_data;
> + if (!probe_func)
> + return -ENODEV;
> +
> + return probe_func(spi);
> }
>
> -static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_resume);
> +static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_spi_resume);
>
> static int tpm_tis_spi_remove(struct spi_device *dev)
> {
> @@ -250,15 +264,17 @@ static int tpm_tis_spi_remove(struct spi_device *dev)
> }
>
> static const struct spi_device_id tpm_tis_spi_id[] = {
> - {"tpm_tis_spi", 0},
> + { "tpm_tis_spi", (unsigned long)tpm_tis_spi_probe },
> + { "cr50", (unsigned long)cr50_spi_probe },
> {}
> };
> MODULE_DEVICE_TABLE(spi, tpm_tis_spi_id);
>
> static const struct of_device_id of_tis_spi_match[] = {
> - { .compatible = "st,st33htpm-spi", },
> - { .compatible = "infineon,slb9670", },
> - { .compatible = "tcg,tpm_tis-spi", },
> + { .compatible = "st,st33htpm-spi", .data = tpm_tis_spi_probe },
> + { .compatible = "infineon,slb9670", .data = tpm_tis_spi_probe },
> + { .compatible = "tcg,tpm_tis-spi", .data = tpm_tis_spi_probe },
> + { .compatible = "google,cr50", .data = cr50_spi_probe },
> {}
> };
> MODULE_DEVICE_TABLE(of, of_tis_spi_match);
> @@ -277,7 +293,7 @@ static struct spi_driver tpm_tis_spi_driver = {
> .of_match_table = of_match_ptr(of_tis_spi_match),
> .acpi_match_table = ACPI_PTR(acpi_tis_spi_match),
> },
> - .probe = tpm_tis_spi_probe,
> + .probe = tpm_tis_spi_driver_probe,
> .remove = tpm_tis_spi_remove,
> .id_table = tpm_tis_spi_id,
> };
> diff --git a/drivers/char/tpm/tpm_tis_spi.h b/drivers/char/tpm/tpm_tis_spi.h
> new file mode 100644
> index 000000000000..afb0e9861c4f
> --- /dev/null
> +++ b/drivers/char/tpm/tpm_tis_spi.h
> @@ -0,0 +1,46 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2015 Infineon Technologies AG
> + * Copyright (C) 2016 STMicroelectronics SAS
> + */
> +
> +#ifndef TPM_TIS_SPI_H
> +#define TPM_TIS_SPI_H
> +
> +#include "tpm_tis_core.h"
> +
> +struct tpm_tis_spi_phy {
> + struct tpm_tis_data priv;
> + struct spi_device *spi_device;
> + int (*flow_control)(struct tpm_tis_spi_phy *phy,
> + struct spi_transfer *xfer);
> + struct completion ready;
> + unsigned long wake_after;
> +
> + u8 *iobuf;
> +};
> +
> +static inline struct tpm_tis_spi_phy *to_tpm_tis_spi_phy(struct tpm_tis_data *data)
> +{
> + return container_of(data, struct tpm_tis_spi_phy, priv);
> +}
> +
> +extern int tpm_tis_spi_init(struct spi_device *spi, struct tpm_tis_spi_phy *phy,
> + int irq, const struct tpm_tis_phy_ops *phy_ops);
> +
> +extern int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
> + u8 *in, const u8 *out);
> +
> +extern int tpm_tis_spi_read16(struct tpm_tis_data *data, u32 addr, u16 *result);
> +extern int tpm_tis_spi_read32(struct tpm_tis_data *data, u32 addr, u32 *result);
> +extern int tpm_tis_spi_write32(struct tpm_tis_data *data, u32 addr, u32 value);
> +
> +extern int cr50_spi_probe(struct spi_device *spi);
> +
> +#ifdef CONFIG_PM_SLEEP
> +extern int tpm_tis_spi_resume(struct device *dev);
> +#else
> +#define tpm_tis_spi_resume NULL
> +#endif
> +
> +#endif
>




\
 
 \ /
  Last update: 2019-08-30 17:34    [W:0.117 / U:3.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site