lkml.org 
[lkml]   [2019]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/5] dt-bindings: arm: idle-states: Add punctuation to improve readability
Date
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Documentation/devicetree/bindings/arm/idle-states.txt | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt
index 4ef0de5c0c7f5990..eb9d725be7a93f4a 100644
--- a/Documentation/devicetree/bindings/arm/idle-states.txt
+++ b/Documentation/devicetree/bindings/arm/idle-states.txt
@@ -214,8 +214,8 @@ processor idle states, defined as device tree nodes, are listed.

Usage: Optional - On ARM systems, it is a container of processor idle
states nodes. If the system does not provide CPU
- power management capabilities or the processor just
- supports idle_standby an idle-states node is not
+ power management capabilities, or the processor just
+ supports idle_standby, an idle-states node is not
required.

Description: idle-states node is a container node, where its
@@ -342,8 +342,8 @@ follows:
state.

In addition to the properties listed above, a state node may require
- additional properties specifics to the entry-method defined in the
- idle-states node, please refer to the entry-method bindings
+ additional properties specific to the entry-method defined in the
+ idle-states node. Please refer to the entry-method bindings
documentation for properties definitions.

===========================================
--
2.17.1
\
 
 \ /
  Last update: 2019-08-30 17:03    [W:0.121 / U:0.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site