lkml.org 
[lkml]   [2019]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [v5 2/2] dt-bindings: mtd: Add Cadence NAND controller driver
Hi Piotr,

Piotr Sroka <piotrs@cadence.com> wrote on Thu, 25 Jul 2019 15:59:55
+0100:

> Document the bindings used by Cadence NAND controller driver
>
> Signed-off-by: Piotr Sroka <piotrs@cadence.com>
> ---
> Changes for v5:
> - replace "_" by "-" in all properties
> - change compatible name from cdns,hpnfc to cdns,hp-nfc
> Changes for v4:
> - add commit message
> Changes for v3:
> - add unit suffix for board_delay
> - move child description to proper place
> - remove prefix cadence_ for reg and sdma fields
> Changes for v2:
> - remove chip dependends parameters from dts bindings
> - add names for register ranges in dts bindings
> - add generic bindings to describe NAND chip representation
> ---
> .../bindings/mtd/cadence-nand-controller.txt | 50 ++++++++++++++++++++++
> 1 file changed, 50 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
>
> diff --git a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
> new file mode 100644
> index 000000000000..423547a3f993
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
> @@ -0,0 +1,50 @@
> +* Cadence NAND controller
> +
> +Required properties:
> + - compatible : "cdns,hp-nfc"
> + - reg : Contains two entries, each of which is a tuple consisting of a
> + physical address and length. The first entry is the address and
> + length of the controller register set. The second entry is the
> + address and length of the Slave DMA data port.
> + - reg-names: should contain "reg" and "sdma"
> + - interrupts : The interrupt number.
> + - clocks: phandle of the controller core clock (nf_clk).
> +
> +Optional properties:
> + - dmas: shall reference DMA channel associated to the NAND controller
> + - cdns,board-delay-ps : Estimated Board delay. The value includes the total
> + round trip delay for the signals and is used for deciding on values
> + associated with data read capture. The example formula for SDR mode is
> + the following:
> + board delay = RE#PAD delay + PCB trace to device + PCB trace from device
> + + DQ PAD delay
> +
> +Child nodes represent the available NAND chips.
> +
> +Required properties of NAND chips:
> + - reg: shall contain the native Chip Select ids from 0 to max supported by
> + the cadence nand flash controller
> +
> +
> +See Documentation/devicetree/bindings/mtd/nand.txt for more details on
> +generic bindings.
> +
> +Example:
> +
> +nand_controller: nand-controller @60000000 {
> + compatible = "cdns,hp-nfc";
> + reg = <0x60000000 0x10000>, <0x80000000 0x10000>;
> + reg-names = "reg", "sdma";
> + clocks = <&nf_clk>;
> + cdns,board-delay-ps = <4830>;

Are you sure you want to export this to the user? Not sure it is easily
understandable and tunable... I'm not against but I would have troubles
tuning it myself, unless using the documented value. Maybe you should
explain more how to derive it?

The rest looks fine, let's see if Rob agrees. Maybe he will request a
yaml schema; in this case you can check sunxi NAND bindings which
already have been converted.

> + interrupts = <2 0>;
> + nand@0 {
> + reg = <0>;
> + label = "nand-1";
> + };
> + nand@1 {
> + reg = <1>;
> + label = "nand-2";
> + };
> +
> +};

Thanks,
Miquèl

\
 
 \ /
  Last update: 2019-08-30 11:46    [W:0.206 / U:6.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site