lkml.org 
[lkml]   [2019]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RESEND PATCH 1/1] rtc: sun6i: Allow using as wakeup source from suspend
On Thu, Aug 22, 2019 at 5:01 AM Alejandro González
<alejandro.gonzalez.correo@gmail.com> wrote:
>
> This patch allows userspace to set up wakeup alarms on any RTC handled by the
> sun6i driver, and adds the necessary PM operations to allow resuming from
> suspend when the configured wakeup alarm fires a IRQ. Of course, that the
> device actually resumes depends on the suspend state and how a particular
> hardware reacts to it, but that is out of scope for this patch.
>
> I've tested these changes on a Pine H64 model B, which contains a
> Allwinner H6 SoC, with the help of CONFIG_PM_TEST_SUSPEND kernel option.
> These are the interesting outputs from the kernel and commands which
> show that it works. As every RTC handled by this driver is largely the
> same, I think that it shouldn't introduce any regression on other SoCs,
> but I may be wrong.
>
> [ 1.092705] PM: test RTC wakeup from 'freeze' suspend
> [ 1.098230] PM: suspend entry (s2idle)
> [ 1.212907] PM: suspend devices took 0.080 seconds
> (The SoC freezes for some seconds)
> [ 3.197604] PM: resume devices took 0.104 seconds
> [ 3.215937] PM: suspend exit
>
> [ 1.092812] PM: test RTC wakeup from 'mem' suspend
> [ 1.098089] PM: suspend entry (deep)
> [ 1.102033] PM: suspend exit
> [ 1.105205] PM: suspend test failed, error -22
>
> In any case, the RTC alarm interrupt gets fired as exptected:
>
> $ echo +5 > /sys/class/rtc/rtc0/wakealarm && sleep 5 && grep rtc /proc/interrupts
> 29: 1 0 0 0 GICv2 133 Level 7000000.rtc
>
> Signed-off-by: Alejandro González <alejandro.gonzalez.correo@gmail.com>

This seems like standard PM stuff. Nothing sunxi-specific.
FWIW, for sunxi,

Acked-by: Chen-Yu Tsai <wens@csie.org>

\
 
 \ /
  Last update: 2019-08-30 11:32    [W:0.085 / U:1.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site