lkml.org 
[lkml]   [2019]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 00/16] crypto: caam - Add i.MX8MQ support
Andrey Smirnov <andrew.smirnov@gmail.com> wrote:
> Everyone:
>
> Picking up where Chris left off (I chatted with him privately
> beforehead), this series adds support for i.MX8MQ to CAAM driver. Just
> like [v1], this series is i.MX8MQ only.
>
> Feedback is welcome!
> Thanks,
> Andrey Smirnov
>
> Changes since [v7]:
>
> - Series rebase on latest cryptodev-2.6 (198429631a85)
>
> - "crypto: caam - force DMA address to 32-bit on 64-bit i.MX SoCs"
> converted to use CTPR and MCFGR to determine CAAM pointer width
> and renamed to "crypto: caam - select DMA address size at runtime"
>
> - Patch adding corresponding DT node added to the series
>
> Changes since [v6]:
>
> - Fixed build problems in "crypto: caam - make CAAM_PTR_SZ dynamic"
>
> - Collected Reviewied-by from Horia
>
> - "crypto: caam - force DMA address to 32-bit on 64-bit i.MX SoCs"
> is changed to check 'caam_ptr_sz' instead of using 'caam_imx'
>
> - Incorporated feedback for "crypto: caam - request JR IRQ as the
> last step" and "crypto: caam - simplfy clock initialization"
>
> Changes since [v5]:
>
> - Hunk replacing sizeof(*jrp->inpring) to SIZEOF_JR_INPENTRY in
> "crypto: caam - don't hardcode inpentry size", lost in [v5], is
> back
>
> - Collected Tested-by from Iuliana
>
> Changes since [v4]:
>
> - Fixed missing sentinel element in "crypto: caam - simplfy clock
> initialization"
>
> - Squashed all of the devers related patches into a single one and
> converted IRQ allocation to use devres while at it
>
> - Added "crypto: caam - request JR IRQ as the last step" as
> discussed
>
> Changes since [v3]:
>
> - Patchset changed to select DMA size at runtime in order to enable
> support for both i.MX8MQ and Layerscape at the same time. I only
> tested the patches on i.MX6,7 and 8MQ, since I don't have access
> to any of the Layerscape HW. Any help in that regard would be
> appareciated.
>
> - Bulk clocks and their number are now stored as a part of struct
> caam_drv_private to simplify allocation and cleanup code (no
> special context needed)
>
> - Renamed 'soc_attr' -> 'imx_soc_match' for clarity
>
> Changes since [v2]:
>
> - Dropped "crypto: caam - do not initialise clocks on the i.MX8" and
> replaced it with "crypto: caam - simplfy clock initialization" and
> "crypto: caam - add clock entry for i.MX8MQ"
>
>
> Changes since [v1]
>
> - Series reworked to continue using register based interface for
> queueing RNG initialization job, dropping "crypto: caam - use job
> ring for RNG instantiation instead of DECO"
>
> - Added a patch to share DMA mask selection code
>
> - Added missing Signed-off-by for authors of original NXP tree
> commits that this sereis is based on
>
> [v7] lore.kernel.org/r/20190812200739.30389-1-andrew.smirnov@gmail.com
> [v6] lore.kernel.org/r/20190717152458.22337-1-andrew.smirnov@gmail.com
> [v5] lore.kernel.org/r/20190715201942.17309-1-andrew.smirnov@gmail.com
> [v4] lore.kernel.org/r/20190703081327.17505-1-andrew.smirnov@gmail.com
> [v3] lore.kernel.org/r/20190617160339.29179-1-andrew.smirnov@gmail.com
> [v2] lore.kernel.org/r/20190607200225.21419-1-andrew.smirnov@gmail.com
> [v1] https://patchwork.kernel.org/cover/10825625/
>
> Andrey Smirnov (16):
> crypto: caam - move DMA mask selection into a function
> crypto: caam - simplfy clock initialization
> crypto: caam - convert caam_jr_init() to use devres
> crypto: caam - request JR IRQ as the last step
> crytpo: caam - make use of iowrite64*_hi_lo in wr_reg64
> crypto: caam - use ioread64*_hi_lo in rd_reg64
> crypto: caam - drop 64-bit only wr/rd_reg64()
> crypto: caam - share definition for MAX_SDLEN
> crypto: caam - make CAAM_PTR_SZ dynamic
> crypto: caam - move cpu_to_caam_dma() selection to runtime
> crypto: caam - drop explicit usage of struct jr_outentry
> crypto: caam - don't hardcode inpentry size
> crypto: caam - select DMA address size at runtime
> crypto: caam - always select job ring via RSR on i.MX8MQ
> crypto: caam - add clock entry for i.MX8MQ
> arm64: dts: imx8mq: Add CAAM node
>
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 30 +++
> drivers/crypto/caam/caamalg.c | 2 +-
> drivers/crypto/caam/caamalg_qi2.h | 27 ---
> drivers/crypto/caam/caamhash.c | 2 +-
> drivers/crypto/caam/caampkc.c | 8 +-
> drivers/crypto/caam/caamrng.c | 2 +-
> drivers/crypto/caam/ctrl.c | 221 ++++++++++------------
> drivers/crypto/caam/desc_constr.h | 47 ++++-
> drivers/crypto/caam/error.c | 3 +
> drivers/crypto/caam/intern.h | 32 +++-
> drivers/crypto/caam/jr.c | 93 +++------
> drivers/crypto/caam/pdb.h | 16 +-
> drivers/crypto/caam/pkc_desc.c | 8 +-
> drivers/crypto/caam/qi.h | 26 ---
> drivers/crypto/caam/regs.h | 140 ++++++++++----
> 15 files changed, 359 insertions(+), 298 deletions(-)

Patches 1-15 applied. Thanks.
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

\
 
 \ /
  Last update: 2019-08-30 10:24    [W:0.154 / U:1.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site