lkml.org 
[lkml]   [2019]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] mmc: sdhci-of-aspeed: Uphold clocks-on post-condition of set_clock()
On Fri, 30 Aug 2019 at 09:46, Andrew Jeffery <andrew@aj.id.au> wrote:
>
> The early-exit didn't seem to matter on the AST2500, but on the AST2600
> the SD clock genuinely may not be running on entry to
> aspeed_sdhci_set_clock(). Remove the early exit to ensure we always run
> sdhci_enable_clk().
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> drivers/mmc/host/sdhci-of-aspeed.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c
> index d5acb5afc50f..a9175ca85696 100644
> --- a/drivers/mmc/host/sdhci-of-aspeed.c
> +++ b/drivers/mmc/host/sdhci-of-aspeed.c
> @@ -55,9 +55,6 @@ static void aspeed_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
> int div;
> u16 clk;
>
> - if (clock == host->clock)
> - return;
> -
> sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
>
> if (clock == 0)
> --
> 2.20.1
>

Further down in aspeed_sdhci_set_clock() you should probably also
remove the assignment of host->clock = clock, as that is already
managed by sdhci_set_ios().

Kind regards
Uffe

\
 
 \ /
  Last update: 2019-08-30 10:02    [W:0.059 / U:3.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site