lkml.org 
[lkml]   [2019]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH 0/5] Add bluetooth support for Orange Pi 3
From
Date
Hi Ondrej,

> (Resend to add missing lists, sorry for the noise.)
>
> This series implements bluetooth support for Xunlong Orange Pi 3 board.
>
> The board uses AP6256 WiFi/BT 5.0 chip.
>
> Summary of changes:
>
> - add more delay to let initialize the chip
> - let the kernel detect firmware file path
> - add new compatible and update dt-bindings
> - update Orange Pi 3 / H6 DTS
>
> Please take a look.
>
> thank you and regards,
> Ondrej Jirman
>
> Ondrej Jirman (5):
> dt-bindings: net: Add compatible for BCM4345C5 bluetooth device
> bluetooth: bcm: Add support for loading firmware for BCM4345C5
> bluetooth: hci_bcm: Give more time to come out of reset
> arm64: dts: allwinner: h6: Add pin configs for uart1
> arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth
>
> .../bindings/net/broadcom-bluetooth.txt | 1 +
> .../dts/allwinner/sun50i-h6-orangepi-3.dts | 19 +++++++++++++++++++
> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++
> drivers/bluetooth/btbcm.c | 3 +++
> drivers/bluetooth/hci_bcm.c | 3 ++-
> 5 files changed, 35 insertions(+), 1 deletion(-)

all 5 patches have been applied to bluetooth-next tree.

Regards

Marcel

\
 
 \ /
  Last update: 2019-08-30 09:53    [W:0.091 / U:7.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site