lkml.org 
[lkml]   [2019]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] rtc: s35390a: convert to devm_i2c_new_dummy_device()
On 20/08/2019 17:42:38+0200, Wolfram Sang wrote:
> I was about to simplify the call to i2c_unregister_device() when I
> realized that converting to devm_i2c_new_dummy_device() will simplify
> the driver a lot. So I took this approach.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> Build tested only, buildbot is happy, too.
>
> Please apply to your tree.
>

Isn't that https://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git/commit/?h=rtc-next&id=ca83542cdb5c14dd369de2539bdca2670d89feea

> drivers/rtc/rtc-s35390a.c | 54 ++++++++++-----------------------------
> 1 file changed, 13 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c
> index 5826209a3f30..da34cfd70f95 100644
> --- a/drivers/rtc/rtc-s35390a.c
> +++ b/drivers/rtc/rtc-s35390a.c
> @@ -434,37 +434,32 @@ static int s35390a_probe(struct i2c_client *client,
> char buf, status1;
> struct device *dev = &client->dev;
>
> - if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> - err = -ENODEV;
> - goto exit;
> - }
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
> + return -ENODEV;
>
> s35390a = devm_kzalloc(dev, sizeof(struct s35390a), GFP_KERNEL);
> - if (!s35390a) {
> - err = -ENOMEM;
> - goto exit;
> - }
> + if (!s35390a)
> + return -ENOMEM;
>
> s35390a->client[0] = client;
> i2c_set_clientdata(client, s35390a);
>
> /* This chip uses multiple addresses, use dummy devices for them */
> for (i = 1; i < 8; ++i) {
> - s35390a->client[i] = i2c_new_dummy_device(client->adapter,
> - client->addr + i);
> + s35390a->client[i] = devm_i2c_new_dummy_device(dev,
> + client->adapter,
> + client->addr + i);
> if (IS_ERR(s35390a->client[i])) {
> dev_err(dev, "Address %02x unavailable\n",
> client->addr + i);
> - err = PTR_ERR(s35390a->client[i]);
> - goto exit_dummy;
> + return PTR_ERR(s35390a->client[i]);
> }
> }
>
> err_read = s35390a_read_status(s35390a, &status1);
> if (err_read < 0) {
> - err = err_read;
> dev_err(dev, "error resetting chip\n");
> - goto exit_dummy;
> + return err_read;
> }
>
> if (status1 & S35390A_FLAG_24H)
> @@ -478,13 +473,13 @@ static int s35390a_probe(struct i2c_client *client,
> err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &buf, 1);
> if (err < 0) {
> dev_err(dev, "error disabling alarm");
> - goto exit_dummy;
> + return err;
> }
> } else {
> err = s35390a_disable_test_mode(s35390a);
> if (err < 0) {
> dev_err(dev, "error disabling test mode\n");
> - goto exit_dummy;
> + return err;
> }
> }
>
> @@ -493,10 +488,8 @@ static int s35390a_probe(struct i2c_client *client,
> s35390a->rtc = devm_rtc_device_register(dev, s35390a_driver.driver.name,
> &s35390a_rtc_ops, THIS_MODULE);
>
> - if (IS_ERR(s35390a->rtc)) {
> - err = PTR_ERR(s35390a->rtc);
> - goto exit_dummy;
> - }
> + if (IS_ERR(s35390a->rtc))
> + return PTR_ERR(s35390a->rtc);
>
> /* supports per-minute alarms only, therefore set uie_unsupported */
> s35390a->rtc->uie_unsupported = 1;
> @@ -505,26 +498,6 @@ static int s35390a_probe(struct i2c_client *client,
> rtc_update_irq(s35390a->rtc, 1, RTC_AF);
>
> return 0;
> -
> -exit_dummy:
> - for (i = 1; i < 8; ++i)
> - if (s35390a->client[i])
> - i2c_unregister_device(s35390a->client[i]);
> -
> -exit:
> - return err;
> -}
> -
> -static int s35390a_remove(struct i2c_client *client)
> -{
> - unsigned int i;
> - struct s35390a *s35390a = i2c_get_clientdata(client);
> -
> - for (i = 1; i < 8; ++i)
> - if (s35390a->client[i])
> - i2c_unregister_device(s35390a->client[i]);
> -
> - return 0;
> }
>
> static struct i2c_driver s35390a_driver = {
> @@ -533,7 +506,6 @@ static struct i2c_driver s35390a_driver = {
> .of_match_table = of_match_ptr(s35390a_of_match),
> },
> .probe = s35390a_probe,
> - .remove = s35390a_remove,
> .id_table = s35390a_id,
> };
>
> --
> 2.20.1
>

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2019-08-29 22:59    [W:0.084 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site