lkml.org 
[lkml]   [2019]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 00/12] implement KASLR for powerpc/fsl_booke/32
On Fri, 2019-08-09 at 18:07 +0800, Jason Yan wrote:
> This series implements KASLR for powerpc/fsl_booke/32, as a security
> feature that deters exploit attempts relying on knowledge of the location
> of kernel internals.
>
> Since CONFIG_RELOCATABLE has already supported, what we need to do is
> map or copy kernel to a proper place and relocate.

Have you tested this with a kernel that was loaded at a non-zero address? I
tried loading a kernel at 0x04000000 (by changing the address in the uImage,
and setting bootm_low to 04000000 in U-Boot), and it works without
CONFIG_RANDOMIZE and fails with.

> Freescale Book-E
> parts expect lowmem to be mapped by fixed TLB entries(TLB1). The TLB1
> entries are not suitable to map the kernel directly in a randomized
> region, so we chose to copy the kernel to a proper place and restart to
> relocate.
>
> Entropy is derived from the banner and timer base, which will change every
> build and boot. This not so much safe so additionally the bootloader may
> pass entropy via the /chosen/kaslr-seed node in device tree.

How complicated would it be to directly access the HW RNG (if present) that
early in the boot? It'd be nice if a U-Boot update weren't required (and
particularly concerning that KASLR would appear to work without a U-Boot
update, but without decent entropy).

-Scott


\
 
 \ /
  Last update: 2019-08-28 06:13    [W:0.154 / U:1.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site