lkml.org 
[lkml]   [2019]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [linux-sunxi] [PATCH v2 0/3] Add basic support for RTC on Allwinner H6 SoC
Hi,

On Sat, Aug 24, 2019 at 10:06:14AM +0200, Jernej Škrabec wrote:
> Dne sobota, 24. avgust 2019 ob 10:04:24 CEST je Jernej Škrabec napisal(a):
> > Hi!
> >
> > Dne torek, 20. avgust 2019 ob 17:19:31 CEST je megous@megous.com napisal(a):
> > > From: Ondrej Jirman <megous@megous.com>
> > >
> > > I went through the datasheets for H6 and H5, and compared the differences.
> > > RTCs are largely similar, but not entirely compatible. Incompatibilities
> > > are in details not yet implemented by the rtc driver though.
> > >
> > > I also corrected the clock tree in H6 DTSI.
> > >
> > > This patchset is necessary for implementing the WiFi/Bluetooth support
> > > on boards using H6 SoC.
> > >
> > > There was some discussion previously of describing HOSC, DCXO and XO
> > > oscillators and clocks as part of RTC in DT, but I decided against it
> > > because it's not necessary, becuse information that would be provided
> > > as a part of DT can already be determined at runtime from RTC registers,
> > > so this woudn't add any value and would only introduce complications
> > > to the driver. See: https://patchwork.kernel.org/cover/10898083/
> > >
> > > Please take a look.
> > >
> > >
> > > Thank you and regards,
> > >
> > > Ondrej Jirman
> >
> > Sorry for a bit late test, but with your patches on Tanix TX6 box I get this
> > in dmesg:
> >
> > [ 17.431742] sun6i-rtc 7000000.rtc: Failed to set rtc time.
> > [ 20.439742] sun6i-rtc 7000000.rtc: rtc is still busy.
> > [ 21.435744] sun6i-rtc 7000000.rtc: rtc is still busy.
> > [ 24.055741] sun6i-rtc 7000000.rtc: rtc is still busy.
> > [ 24.439752] sun6i-rtc 7000000.rtc: rtc is still busy.
> >
> > Last line is repeated non-stop.
> >
> > Any idea what could be wrong?
>
> Additional info - this is on kernel 5.2.6 with your patches applied.

Do you have schematics, or a FEX file for the board or any other info on how the
RTC is set up on that board?

Can you dump the RTC register range?

regards,
o.

> Best regards,
> Jernej
>
>
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2019-08-24 14:57    [W:0.060 / U:7.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site