[lkml]   [2019]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] iommu/vt-d: Fix wrong analysis whether devices share the same bus

On 2019-08-20 2:53 a.m., Nadav Amit wrote:
> set_msi_sid_cb() is used to determine whether device aliases share the
> same bus, but it can provide false indications that aliases use the same
> bus when in fact they do not. The reason is that set_msi_sid_cb()
> assumes that pdev is fixed, while actually pci_for_each_dma_alias() can
> call fn() when pdev is set to a subordinate device.
> As a result, running an VM on ESX with VT-d emulation enabled can
> results in the log warning such as:
> DMAR: [INTR-REMAP] Request device [00:11.0] fault index 3b [fault reason 38] Blocked an interrupt request due to source-id verification failure
> This seems to cause additional ata errors such as:
> ata3.00: qc timeout (cmd 0xa1)
> ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> These timeouts also cause boot to be much longer and other errors.
> Fix it by checking comparing the alias with the previous one instead.
> Fixes: 3f0c625c6ae71 ("iommu/vt-d: Allow interrupts from the entire bus for aliased devices")
> Cc:
> Cc: Logan Gunthorpe <>
> Cc: David Woodhouse <>
> Cc: Joerg Roedel <>
> Cc: Jacob Pan <>
> Signed-off-by: Nadav Amit <>

This looks good to me.

Reviewed-by: Logan Gunthorpe <>



 \ /
  Last update: 2019-08-24 01:07    [W:0.118 / U:1.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site