lkml.org 
[lkml]   [2019]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/5] arm64: dts: meson-sm1-sei610: add HDMI display support
From
Date
On 22/08/2019 01:31, Kevin Hilman wrote:
> Neil Armstrong <narmstrong@baylibre.com> writes:
>
>> Update compatible of the pwc-vpu node and add the HDMI support nodes
>> for the Amlogic SM1 Based SEI610 Board.
>
> I think this changelog is out of date. It's not doing anything with the
> VPU pwrc node.

Exact, thanks for pointing it

>
> Kevin
>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> .../boot/dts/amlogic/meson-sm1-sei610.dts | 23 +++++++++++++++++++
>> 1 file changed, 23 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
>> index 12dab0ba2f26..66bd3bfbaf91 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
>> @@ -51,6 +51,17 @@
>> };
>> };
>>
>> + hdmi-connector {
>> + compatible = "hdmi-connector";
>> + type = "a";
>> +
>> + port {
>> + hdmi_connector_in: endpoint {
>> + remote-endpoint = <&hdmi_tx_tmds_out>;
>> + };
>> + };
>> + };
>> +
>> leds {
>> compatible = "gpio-leds";
>>
>> @@ -177,6 +188,18 @@
>> phy-mode = "rmii";
>> };
>>
>> +&hdmi_tx {
>> + status = "okay";
>> + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
>> + pinctrl-names = "default";
>> +};
>> +
>> +&hdmi_tx_tmds_port {
>> + hdmi_tx_tmds_out: endpoint {
>> + remote-endpoint = <&hdmi_connector_in>;
>> + };
>> +};
>> +
>> &i2c3 {
>> status = "okay";
>> pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
>> --
>> 2.22.0

\
 
 \ /
  Last update: 2019-08-22 10:24    [W:0.072 / U:5.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site