lkml.org 
[lkml]   [2019]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 1/2] dt-binding: net: document NPCM7xx EMC 10/100 DT bindings
On Thu, Aug 01, 2019 at 10:26:10AM +0300, Avi Fishman wrote:
> Added device tree binding documentation for
> Nuvoton NPCM7xx Ethernet MAC Controller (EMC) 10/100 RMII
>
> Signed-off-by: Avi Fishman <avifishman70@gmail.com>
> ---
> .../bindings/net/nuvoton,npcm7xx-emc.txt | 38 +++++++++++++++++++
> 1 file changed, 38 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt

Consider converting this to DT schema (YAML).

>
> diff --git a/Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt b/Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt
> new file mode 100644
> index 000000000000..a7ac3ca66de9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt
> @@ -0,0 +1,38 @@
> +Nuvoton NPCM7XX 10/100 Ethernet MAC Controller (EMC)
> +
> +The NPCM7XX provides one or two Ethernet MAC RMII Controllers
> +for WAN/LAN applications
> +
> +Required properties:
> +- device_type : Should be "network"

Drop this. device_type is deprecated for FDT except for a few cases.

> +- compatible : "nuvoton,npcm750-emc" for Poleg NPCM7XX.
> +- reg : Offset and length of the register set for the device.
> +- interrupts : Contain the emc interrupts with flags for falling edge.
> + first interrupt dedicated to Txirq
> + second interrupt dedicated to Rxirq
> +- phy-mode : Should be "rmii" (see ethernet.txt in the same directory)
> +- clocks : phandle of emc reference clock.
> +- resets : phandle to the reset control for this device.
> +- use-ncsi : Use the NC-SI stack instead of an MDIO PHY

Vendor prefix needed.

> +
> +Example:
> +
> +emc0: eth@f0825000 {

ethernet@...

> + device_type = "network";
> + compatible = "nuvoton,npcm750-emc";
> + reg = <0xf0825000 0x1000>;
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> + phy-mode = "rmii";
> + clocks = <&clk NPCM7XX_CLK_AHB>;
> +
> + #use-ncsi; /* add this to support ncsi */

Doesn't match the binding.

> +
> + clock-names = "clk_emc";
> + resets = <&rstc 6>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&r1_pins
> + &r1err_pins
> + &r1md_pins>;
> + status = "okay";

Drop status in examples.

> +};
> --
> 2.18.0
>

\
 
 \ /
  Last update: 2019-08-21 20:34    [W:0.089 / U:1.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site