lkml.org 
[lkml]   [2019]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 4/7] PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
Date
The Root Port (identified by [1c36:0031]) doesn't support MSI-X. On some
platforms it is configured to not advertise the capability at all, while
on others it (mistakenly) does. This causes a panic during
initialization by the pcieport driver, since it tries to configure the
MSI-X capability. Specifically, when trying to access the MSI-X table
a "non-existing addr" exception occurs.

Example stacktrace snippet:

[ 1.632363] SError Interrupt on CPU2, code 0xbf000000 -- SError
[ 1.632364] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33
[ 1.632365] Hardware name: Annapurna Labs Alpine V3 EVP (DT)
[ 1.632365] pstate: 80000005 (Nzcv daif -PAN -UAO)
[ 1.632366] pc : __pci_enable_msix_range+0x4e4/0x608
[ 1.632367] lr : __pci_enable_msix_range+0x498/0x608
[ 1.632367] sp : ffffff80117db700
[ 1.632368] x29: ffffff80117db700 x28: 0000000000000001
[ 1.632370] x27: 0000000000000001 x26: 0000000000000000
[ 1.632372] x25: ffffffd3e9d8c0b0 x24: 0000000000000000
[ 1.632373] x23: 0000000000000000 x22: 0000000000000000
[ 1.632375] x21: 0000000000000001 x20: 0000000000000000
[ 1.632376] x19: ffffffd3e9d8c000 x18: ffffffffffffffff
[ 1.632378] x17: 0000000000000000 x16: 0000000000000000
[ 1.632379] x15: ffffff80116496c8 x14: ffffffd3e9844503
[ 1.632380] x13: ffffffd3e9844502 x12: 0000000000000038
[ 1.632382] x11: ffffffffffffff00 x10: 0000000000000040
[ 1.632384] x9 : ffffff801165e270 x8 : ffffff801165e268
[ 1.632385] x7 : 0000000000000002 x6 : 00000000000000b2
[ 1.632387] x5 : ffffffd3e9d8c2c0 x4 : 0000000000000000
[ 1.632388] x3 : 0000000000000000 x2 : 0000000000000000
[ 1.632390] x1 : 0000000000000000 x0 : ffffffd3e9844680
[ 1.632392] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 1.632393] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33
[ 1.632394] Hardware name: Annapurna Labs Alpine V3 EVP (DT)
[ 1.632394] Call trace:
[ 1.632395] dump_backtrace+0x0/0x140
[ 1.632395] show_stack+0x14/0x20
[ 1.632396] dump_stack+0xa8/0xcc
[ 1.632396] panic+0x140/0x334
[ 1.632397] nmi_panic+0x6c/0x70
[ 1.632398] arm64_serror_panic+0x74/0x88
[ 1.632398] __pte_error+0x0/0x28
[ 1.632399] el1_error+0x84/0xf8
[ 1.632400] __pci_enable_msix_range+0x4e4/0x608
[ 1.632400] pci_alloc_irq_vectors_affinity+0xdc/0x150
[ 1.632401] pcie_port_device_register+0x2b8/0x4e0
[ 1.632402] pcie_portdrv_probe+0x34/0xf0

Notice that this quirk also disables MSI (which may work, but hasn't
been tested nor has a current use case), since currently there is no
standard way to disable only MSI-X.

Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
drivers/pci/quirks.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 23672680dba7..b6e6e7df3f7b 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2925,6 +2925,24 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1,
quirk_msi_intx_disable_qca_bug);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091,
quirk_msi_intx_disable_qca_bug);
+
+/*
+ * Amazon's Annapurna Labs 1c36:0031 Root Ports don't support MSI-X, so it
+ * should be disabled on platforms where the device (mistakenly) advertises it.
+ *
+ * Notice that this quirk also disables MSI (which may work, but hasn't been
+ * tested), since currently there is no standard way to disable only MSI-X.
+ *
+ * The 0031 device id is reused for other non Root Port device types,
+ * therefore the quirk is registered for the PCI_CLASS_BRIDGE_PCI class.
+ */
+static void quirk_al_msi_disable(struct pci_dev *dev)
+{
+ dev->no_msi = 1;
+ pci_warn(dev, "Disabling MSI/MSI-X\n");
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031,
+ PCI_CLASS_BRIDGE_PCI, 8, quirk_al_msi_disable);
#endif /* CONFIG_PCI_MSI */

/*
--
2.17.1
\
 
 \ /
  Last update: 2019-08-21 17:36    [W:0.218 / U:1.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site