lkml.org 
[lkml]   [2019]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/8] EDAC/amd64: Initialize DIMM info for systems with more than two channels
Date
From: Yazen Ghannam <yazen.ghannam@amd.com>

Currently, the DIMM info for AMD Family 17h systems is initialized in
init_csrows(). This function is shared with legacy systems, and it has a
limit of two channel support.

This prevents initialization of the DIMM info for a number of ranks, so
there will be missing ranks in the EDAC sysfs.

Create a new init_csrows_df() for Family17h+ and revert init_csrows()
back to pre-Family17h support.

Loop over all channels in the new function in order to support systems
with more than two channels.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20190709215643.171078-4-Yazen.Ghannam@amd.com

v2->v3:
* Drop Fixes: tag.
* Add x8 DRAM device case.

v1->v2:
* No change.

drivers/edac/amd64_edac.c | 66 ++++++++++++++++++++++++++++++---------
1 file changed, 52 insertions(+), 14 deletions(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 0e8b2137edbb..001dc85122e9 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2837,6 +2837,49 @@ static u32 get_csrow_nr_pages(struct amd64_pvt *pvt, u8 dct, int csrow_nr_orig)
return nr_pages;
}

+static int init_csrows_df(struct mem_ctl_info *mci)
+{
+ struct amd64_pvt *pvt = mci->pvt_info;
+ enum edac_type edac_mode = EDAC_NONE;
+ enum dev_type dev_type = DEV_UNKNOWN;
+ struct dimm_info *dimm;
+ int empty = 1;
+ u8 umc, cs;
+
+ if (mci->edac_ctl_cap & EDAC_FLAG_S16ECD16ED) {
+ edac_mode = EDAC_S16ECD16ED;
+ dev_type = DEV_X16;
+ } else if (mci->edac_ctl_cap & EDAC_FLAG_S8ECD8ED) {
+ edac_mode = EDAC_S8ECD8ED;
+ dev_type = DEV_X8;
+ } else if (mci->edac_ctl_cap & EDAC_FLAG_S4ECD4ED) {
+ edac_mode = EDAC_S4ECD4ED;
+ dev_type = DEV_X4;
+ } else if (mci->edac_ctl_cap & EDAC_FLAG_SECDED) {
+ edac_mode = EDAC_SECDED;
+ }
+
+ for_each_umc(umc) {
+ for_each_chip_select(cs, umc, pvt) {
+ if (!csrow_enabled(cs, umc, pvt))
+ continue;
+
+ empty = 0;
+ dimm = mci->csrows[cs]->channels[umc]->dimm;
+
+ edac_dbg(1, "MC node: %d, csrow: %d\n",
+ pvt->mc_node_id, cs);
+
+ dimm->nr_pages = get_csrow_nr_pages(pvt, umc, cs);
+ dimm->mtype = pvt->dram_type;
+ dimm->edac_mode = edac_mode;
+ dimm->dtype = dev_type;
+ }
+ }
+
+ return empty;
+}
+
/*
* Initialize the array of csrow attribute instances, based on the values
* from pci config hardware registers.
@@ -2851,15 +2894,16 @@ static int init_csrows(struct mem_ctl_info *mci)
int nr_pages = 0;
u32 val;

- if (!pvt->umc) {
- amd64_read_pci_cfg(pvt->F3, NBCFG, &val);
+ if (pvt->umc)
+ return init_csrows_df(mci);
+
+ amd64_read_pci_cfg(pvt->F3, NBCFG, &val);

- pvt->nbcfg = val;
+ pvt->nbcfg = val;

- edac_dbg(0, "node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n",
- pvt->mc_node_id, val,
- !!(val & NBCFG_CHIPKILL), !!(val & NBCFG_ECC_ENABLE));
- }
+ edac_dbg(0, "node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n",
+ pvt->mc_node_id, val,
+ !!(val & NBCFG_CHIPKILL), !!(val & NBCFG_ECC_ENABLE));

/*
* We iterate over DCT0 here but we look at DCT1 in parallel, if needed.
@@ -2896,13 +2940,7 @@ static int init_csrows(struct mem_ctl_info *mci)
edac_dbg(1, "Total csrow%d pages: %u\n", i, nr_pages);

/* Determine DIMM ECC mode: */
- if (pvt->umc) {
- if (mci->edac_ctl_cap & EDAC_FLAG_S4ECD4ED)
- edac_mode = EDAC_S4ECD4ED;
- else if (mci->edac_ctl_cap & EDAC_FLAG_SECDED)
- edac_mode = EDAC_SECDED;
-
- } else if (pvt->nbcfg & NBCFG_ECC_ENABLE) {
+ if (pvt->nbcfg & NBCFG_ECC_ENABLE) {
edac_mode = (pvt->nbcfg & NBCFG_CHIPKILL)
? EDAC_S4ECD4ED
: EDAC_SECDED;
--
2.17.1
\
 
 \ /
  Last update: 2019-08-22 02:02    [W:0.180 / U:4.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site