lkml.org 
[lkml]   [2019]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH net] ixgbe: fix double clean of tx descriptors with xdp
On Wed, Aug 21, 2019 at 9:57 AM Alexander Duyck
<alexander.duyck@gmail.com> wrote:
>
> On Wed, Aug 21, 2019 at 9:22 AM Ilya Maximets <i.maximets@samsung.com> wrote:
> >
> > On 21.08.2019 4:17, Alexander Duyck wrote:
> > > On Tue, Aug 20, 2019 at 8:58 AM Ilya Maximets <i.maximets@samsung.com> wrote:
> > >>
> > >> On 20.08.2019 18:35, Alexander Duyck wrote:
> > >>> On Tue, Aug 20, 2019 at 8:18 AM Ilya Maximets <i.maximets@samsung.com> wrote:
> > >>>>
> > >>>> Tx code doesn't clear the descriptor status after cleaning.
> > >>>> So, if the budget is larger than number of used elems in a ring, some
> > >>>> descriptors will be accounted twice and xsk_umem_complete_tx will move
> > >>>> prod_tail far beyond the prod_head breaking the comletion queue ring.
> > >>>>
> > >>>> Fix that by limiting the number of descriptors to clean by the number
> > >>>> of used descriptors in the tx ring.
> > >>>>
> > >>>> Fixes: 8221c5eba8c1 ("ixgbe: add AF_XDP zero-copy Tx support")
> > >>>> Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
> > >>>
> > >>> I'm not sure this is the best way to go. My preference would be to
> > >>> have something in the ring that would prevent us from racing which I
> > >>> don't think this really addresses. I am pretty sure this code is safe
> > >>> on x86 but I would be worried about weak ordered systems such as
> > >>> PowerPC.
> > >>>
> > >>> It might make sense to look at adding the eop_desc logic like we have
> > >>> in the regular path with a proper barrier before we write it and after
> > >>> we read it. So for example we could hold of on writing the bytecount
> > >>> value until the end of an iteration and call smp_wmb before we write
> > >>> it. Then on the cleanup we could read it and if it is non-zero we take
> > >>> an smp_rmb before proceeding further to process the Tx descriptor and
> > >>> clearing the value. Otherwise this code is going to just keep popping
> > >>> up with issues.
> > >>
> > >> But, unlike regular case, xdp zero-copy xmit and clean for particular
> > >> tx ring always happens in the same NAPI context and even on the same
> > >> CPU core.
> > >>
> > >> I saw the 'eop_desc' manipulations in regular case and yes, we could
> > >> use 'next_to_watch' field just as a flag of descriptor existence,
> > >> but it seems unnecessarily complicated. Am I missing something?
> > >>
> > >
> > > So is it always in the same NAPI context?. I forgot, I was thinking
> > > that somehow the socket could possibly make use of XDP for transmit.
> >
> > AF_XDP socket only triggers tx interrupt on ndo_xsk_async_xmit() which
> > is used in zero-copy mode. Real xmit happens inside
> > ixgbe_poll()
> > -> ixgbe_clean_xdp_tx_irq()
> > -> ixgbe_xmit_zc()
> >
> > This should be not possible to bound another XDP socket to the same netdev
> > queue.
> >
> > It also possible to xmit frames in xdp_ring while performing XDP_TX/REDIRECT
> > actions. REDIRECT could happen from different netdev with different NAPI
> > context, but this operation is bound to specific CPU core and each core has
> > its own xdp_ring.
> >
> > However, I'm not an expert here.
> > Björn, maybe you could comment on this?
> >
> > >
> > > As far as the logic to use I would be good with just using a value you
> > > are already setting such as the bytecount value. All that would need
> > > to happen is to guarantee that the value is cleared in the Tx path. So
> > > if you clear the bytecount in ixgbe_clean_xdp_tx_irq you could
> > > theoretically just use that as well to flag that a descriptor has been
> > > populated and is ready to be cleaned. Assuming the logic about this
> > > all being in the same NAPI context anyway you wouldn't need to mess
> > > with the barrier stuff I mentioned before.
> >
> > Checking the number of used descs, i.e. next_to_use - next_to_clean,
> > makes iteration in this function logically equal to the iteration inside
> > 'ixgbe_xsk_clean_tx_ring()'. Do you think we need to change the later
> > function too to follow same 'bytecount' approach? I don't like having
> > two different ways to determine number of used descriptors in the same file.
> >
> > Best regards, Ilya Maximets.
>
> As far as ixgbe_clean_xdp_tx_irq() vs ixgbe_xsk_clean_tx_ring(), I
> would say that if you got rid of budget and framed things more like
> how ixgbe_xsk_clean_tx_ring was framed with the ntc != ntu being
> obvious I would prefer to see us go that route.
>
> Really there is no need for budget in ixgbe_clean_xdp_tx_irq() if you
> are going to be working with a static ntu value since you will only
> ever process one iteration through the ring anyway. It might make more
> sense if you just went through and got rid of budget and i, and
> instead used ntc and ntu like what was done in
> ixgbe_xsk_clean_tx_ring().
>
> Thanks.
>
> - Alex

Not familiar with the driver details.
I tested this patch and the issue mentioned in OVS mailing list.
https://www.mail-archive.com/ovs-dev@openvswitch.org/msg35362.html
and indeed the problem goes away. But I saw a huge performance drop,
my AF_XDP tx performance drops from >9Mpps to <5Mpps.

Tested using kernel 5.3.0-rc3+
03:00.0 Ethernet controller: Intel Corporation Ethernet Controller
10-Gigabit X540-AT2 (rev 01)
Subsystem: Intel Corporation Ethernet 10G 2P X540-t Adapter
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+

Regards,
William

\
 
 \ /
  Last update: 2019-08-21 23:39    [W:0.114 / U:10.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site