lkml.org 
[lkml]   [2019]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH 1/1] rtc: sun6i: Allow using as wakeup source from suspend
Date
This patch allows userspace to set up wakeup alarms on any RTC handled by the
sun6i driver, and adds the necessary PM operations to allow resuming from
suspend when the configured wakeup alarm fires a IRQ. Of course, that the
device actually resumes depends on the suspend state and how a particular
hardware reacts to it, but that is out of scope for this patch.

I've tested these changes on a Pine H64 model B, which contains a
Allwinner H6 SoC, with the help of CONFIG_PM_TEST_SUSPEND kernel option.
These are the interesting outputs from the kernel and commands which
show that it works. As every RTC handled by this driver is largely the
same, I think that it shouldn't introduce any regression on other SoCs,
but I may be wrong.

[ 1.092705] PM: test RTC wakeup from 'freeze' suspend
[ 1.098230] PM: suspend entry (s2idle)
[ 1.212907] PM: suspend devices took 0.080 seconds
(The SoC freezes for some seconds)
[ 3.197604] PM: resume devices took 0.104 seconds
[ 3.215937] PM: suspend exit

[ 1.092812] PM: test RTC wakeup from 'mem' suspend
[ 1.098089] PM: suspend entry (deep)
[ 1.102033] PM: suspend exit
[ 1.105205] PM: suspend test failed, error -22

In any case, the RTC alarm interrupt gets fired as exptected:

$ echo +5 > /sys/class/rtc/rtc0/wakealarm && sleep 5 && grep rtc /proc/interrupts
29: 1 0 0 0 GICv2 133 Level 7000000.rtc

Signed-off-by: Alejandro González <alejandro.gonzalez.correo@gmail.com>
---
drivers/rtc/rtc-sun6i.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)

diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c
index c0e75c373605..b7611e5dea3f 100644
--- a/drivers/rtc/rtc-sun6i.c
+++ b/drivers/rtc/rtc-sun6i.c
@@ -598,6 +598,33 @@ static const struct rtc_class_ops sun6i_rtc_ops = {
.alarm_irq_enable = sun6i_rtc_alarm_irq_enable
};

+#ifdef CONFIG_PM_SLEEP
+/* Enable IRQ wake on suspend, to wake up from RTC. */
+static int sun6i_rtc_suspend(struct device *dev)
+{
+ struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(chip->irq);
+
+ return 0;
+}
+
+/* Disable IRQ wake on resume. */
+static int sun6i_rtc_resume(struct device *dev)
+{
+ struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(chip->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sun6i_rtc_pm_ops,
+ sun6i_rtc_suspend, sun6i_rtc_resume);
+
static int sun6i_rtc_probe(struct platform_device *pdev)
{
struct sun6i_rtc_dev *chip = sun6i_rtc;
@@ -650,6 +677,8 @@ static int sun6i_rtc_probe(struct platform_device *pdev)

clk_prepare_enable(chip->losc);

+ device_init_wakeup(&pdev->dev, 1);
+
chip->rtc = devm_rtc_device_register(&pdev->dev, "rtc-sun6i",
&sun6i_rtc_ops, THIS_MODULE);
if (IS_ERR(chip->rtc)) {
@@ -684,6 +713,7 @@ static struct platform_driver sun6i_rtc_driver = {
.driver = {
.name = "sun6i-rtc",
.of_match_table = sun6i_rtc_dt_ids,
+ .pm = &sun6i_rtc_pm_ops,
},
};
builtin_platform_driver(sun6i_rtc_driver);
--
2.20.1
\
 
 \ /
  Last update: 2019-08-21 23:01    [W:0.080 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site