lkml.org 
[lkml]   [2019]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 09/11] dma-direct: turn ARCH_ZONE_DMA_BITS into a variable
Date
Some architectures, notably arm64, are interested in tweaking this
depending on their runtime dma addressing limitations.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---

Changes in v2:
- Rename new variable to zone_dma_bits
- Update comment with Christoph's suggestion
- Remove old powerpc comment

arch/powerpc/include/asm/page.h | 9 ---------
arch/powerpc/mm/mem.c | 16 +++++++++++-----
arch/s390/include/asm/page.h | 2 --
arch/s390/mm/init.c | 1 +
include/linux/dma-direct.h | 2 ++
kernel/dma/direct.c | 13 ++++++-------
6 files changed, 20 insertions(+), 23 deletions(-)

diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 0d52f57fca04..73668a21ae78 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -319,13 +319,4 @@ struct vm_area_struct;
#endif /* __ASSEMBLY__ */
#include <asm/slice.h>

-/*
- * Allow 30-bit DMA for very limited Broadcom wifi chips on many powerbooks.
- */
-#ifdef CONFIG_PPC32
-#define ARCH_ZONE_DMA_BITS 30
-#else
-#define ARCH_ZONE_DMA_BITS 31
-#endif
-
#endif /* _ASM_POWERPC_PAGE_H */
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 9191a66b3bc5..2a69f87585df 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -31,6 +31,7 @@
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/memremap.h>
+#include <linux/dma-direct.h>

#include <asm/pgalloc.h>
#include <asm/prom.h>
@@ -201,10 +202,10 @@ static int __init mark_nonram_nosave(void)
* everything else. GFP_DMA32 page allocations automatically fall back to
* ZONE_DMA.
*
- * By using 31-bit unconditionally, we can exploit ARCH_ZONE_DMA_BITS to
- * inform the generic DMA mapping code. 32-bit only devices (if not handled
- * by an IOMMU anyway) will take a first dip into ZONE_NORMAL and get
- * otherwise served by ZONE_DMA.
+ * By using 31-bit unconditionally, we can exploit zone_dma_bits to inform the
+ * generic DMA mapping code. 32-bit only devices (if not handled by an IOMMU
+ * anyway) will take a first dip into ZONE_NORMAL and get otherwise served by
+ * ZONE_DMA.
*/
static unsigned long max_zone_pfns[MAX_NR_ZONES];

@@ -237,9 +238,14 @@ void __init paging_init(void)
printk(KERN_DEBUG "Memory hole size: %ldMB\n",
(long int)((top_of_ram - total_ram) >> 20));

+ if (IS_ENABLED(CONFIG_PPC32))
+ zone_dma_bits = 30;
+ else
+ zone_dma_bits = 31;
+
#ifdef CONFIG_ZONE_DMA
max_zone_pfns[ZONE_DMA] = min(max_low_pfn,
- 1UL << (ARCH_ZONE_DMA_BITS - PAGE_SHIFT));
+ 1UL << (zone_dma_bits - PAGE_SHIFT));
#endif
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_HIGHMEM
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index 823578c6b9e2..a4d38092530a 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -177,8 +177,6 @@ static inline int devmem_is_allowed(unsigned long pfn)
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)

-#define ARCH_ZONE_DMA_BITS 31
-
#include <asm-generic/memory_model.h>
#include <asm-generic/getorder.h>

diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 20340a03ad90..bd98465b8b9f 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -118,6 +118,7 @@ void __init paging_init(void)

sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
+ zone_dma_bits = 31;
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
max_zone_pfns[ZONE_DMA] = PFN_DOWN(MAX_DMA_ADDRESS);
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
index adf993a3bd58..d03af3605460 100644
--- a/include/linux/dma-direct.h
+++ b/include/linux/dma-direct.h
@@ -5,6 +5,8 @@
#include <linux/dma-mapping.h>
#include <linux/mem_encrypt.h>

+extern unsigned int zone_dma_bits;
+
#ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA
#include <asm/dma-direct.h>
#else
diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
index 795c9b095d75..b23cd65f26e0 100644
--- a/kernel/dma/direct.c
+++ b/kernel/dma/direct.c
@@ -16,12 +16,11 @@
#include <linux/swiotlb.h>

/*
- * Most architectures use ZONE_DMA for the first 16 Megabytes, but
- * some use it for entirely different regions:
+ * Most architectures use ZONE_DMA for the first 16 Megabytes, but some use it
+ * it for entirely different regions. In that case the arch code needs to
+ * override the variable below for dma-direct to work properly.
*/
-#ifndef ARCH_ZONE_DMA_BITS
-#define ARCH_ZONE_DMA_BITS 24
-#endif
+unsigned int zone_dma_bits __ro_after_init = 24;

static void report_addr(struct device *dev, dma_addr_t dma_addr, size_t size)
{
@@ -69,7 +68,7 @@ static gfp_t __dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask,
* Note that GFP_DMA32 and GFP_DMA are no ops without the corresponding
* zones.
*/
- if (*phys_mask <= DMA_BIT_MASK(ARCH_ZONE_DMA_BITS))
+ if (*phys_mask <= DMA_BIT_MASK(zone_dma_bits))
return GFP_DMA;
if (*phys_mask <= DMA_BIT_MASK(32))
return GFP_DMA32;
@@ -387,7 +386,7 @@ int dma_direct_supported(struct device *dev, u64 mask)
u64 min_mask;

if (IS_ENABLED(CONFIG_ZONE_DMA))
- min_mask = DMA_BIT_MASK(ARCH_ZONE_DMA_BITS);
+ min_mask = DMA_BIT_MASK(zone_dma_bits);
else
min_mask = DMA_BIT_MASK(32);

--
2.22.0
\
 
 \ /
  Last update: 2019-08-20 17:04    [W:0.215 / U:0.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site