lkml.org 
[lkml]   [2019]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/3] dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller
On Tue, Aug 20, 2019 at 4:40 AM Dilip Kota <eswara.kota@linux.intel.com> wrote:
>
> The Intel PCIe RC controller is Synopsys Designware
> based PCIe core. Add YAML schemas for PCIe in RC mode
> present in Intel Universal Gateway soc.

Run 'make dt_binding_check' and fix all the warnings.

>
> Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
> ---
> .../devicetree/bindings/pci/intel-pcie.yaml | 133 +++++++++++++++++++++
> 1 file changed, 133 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/intel-pcie.yaml
>
> diff --git a/Documentation/devicetree/bindings/pci/intel-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-pcie.yaml
> new file mode 100644
> index 000000000000..80caaaba5e2c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/intel-pcie.yaml
> @@ -0,0 +1,133 @@
> +# SPDX-License-Identifier: GPL-2.0

(GPL-2.0-only OR BSD-2-Clause) is preferred for new bindings.

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/intel-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Intel AXI bus based PCI express root complex
> +
> +maintainers:
> + - Dilip Kota <eswara.kota@linux.intel.com>
> +
> +properties:
> + compatible:
> + const: intel,lgm-pcie
> +
> + device_type:
> + const: pci
> +
> + "#address-cells":
> + const: 3
> +
> + "#size-cells":
> + const: 2
> +
> + reg:
> + items:
> + - description: Controller control and status registers.
> + - description: PCIe configuration registers.
> + - description: Controller application registers.
> +
> + reg-names:
> + items:
> + - const: dbi
> + - const: config
> + - const: app
> +
> + ranges:
> + description: Ranges for the PCI memory and I/O regions.
> +
> + resets:
> + maxItems: 1
> +
> + clocks:
> + description: PCIe registers interface clock.
> +
> + phys:
> + maxItems: 1
> +
> + phy-names:
> + const: phy
> +
> + reset-gpios:
> + maxItems: 1
> +
> + num-lanes:
> + description: Number of lanes to use for this port.
> +
> + linux,pci-domain:
> + description: PCI domain ID.
> +
> + interrupts:
> + description: PCIe core integrated miscellaneous interrupt.
> +
> + interrupt-map-mask:
> + description: Standard PCI IRQ mapping properties.
> +
> + interrupt-map:
> + description: Standard PCI IRQ mapping properties.
> +
> + max-link-speed:
> + description: Specify PCI Gen for link capability.
> +
> + bus-range:
> + description: Range of bus numbers associated with this controller.
> +
> + intel,rst-interval:

Use 'reset-assert-us'

> + description: |
> + Device reset interval in ms. Some devices need an interval upto 500ms.
> + By default it is 100ms.
> +
> +required:
> + - compatible
> + - device_type
> + - reg
> + - reg-names
> + - ranges
> + - resets
> + - clocks
> + - phys
> + - phy-names
> + - reset-gpios
> + - num-lanes
> + - linux,pci-domain
> + - interrupts
> + - interrupt-map
> + - interrupt-map-mask
> +
> +examples:
> + - |
> + pcie10:pcie@d0e00000 {
> + compatible = "intel,lgm-pcie";
> + device_type = "pci";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + reg = <
> + 0xd0e00000 0x1000
> + 0xd2000000 0x800000
> + 0xd0a41000 0x1000
> + >;
> + reg-names = "dbi", "config", "app";
> + linux,pci-domain = <0>;
> + max-link-speed = <4>;
> + bus-range = <0x00 0x08>;
> + interrupt-parent = <&ioapic1>;
> + interrupts = <67 1>;
> + interrupt-map-mask = <0 0 0 0x7>;
> + interrupt-map = <0 0 0 1 &ioapic1 27 1>,
> + <0 0 0 2 &ioapic1 28 1>,
> + <0 0 0 3 &ioapic1 29 1>,
> + <0 0 0 4 &ioapic1 30 1>;
> + ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
> + resets = <&rcu0 0x50 0>;
> + clocks = <&cgu0 LGM_GCLK_PCIE10>;
> + phys = <&cb0phy0>;
> + phy-names = "phy";
> + };
> +
> + &pcie10 {

Don't show this soc/board split in examples. Just combine to one node.

> + status = "okay";
> + intel,rst-interval = <100>;
> + reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
> + num-lanes = <2>;
> + };
> --
> 2.11.0
>

\
 
 \ /
  Last update: 2019-08-20 15:56    [W:0.098 / U:9.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site