lkml.org 
[lkml]   [2019]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller
Date
The Intel PCIe RC controller is Synopsys Designware
based PCIe core. Add YAML schemas for PCIe in RC mode
present in Intel Universal Gateway soc.

Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
---
.../devicetree/bindings/pci/intel-pcie.yaml | 133 +++++++++++++++++++++
1 file changed, 133 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/intel-pcie.yaml

diff --git a/Documentation/devicetree/bindings/pci/intel-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-pcie.yaml
new file mode 100644
index 000000000000..80caaaba5e2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel-pcie.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel AXI bus based PCI express root complex
+
+maintainers:
+ - Dilip Kota <eswara.kota@linux.intel.com>
+
+properties:
+ compatible:
+ const: intel,lgm-pcie
+
+ device_type:
+ const: pci
+
+ "#address-cells":
+ const: 3
+
+ "#size-cells":
+ const: 2
+
+ reg:
+ items:
+ - description: Controller control and status registers.
+ - description: PCIe configuration registers.
+ - description: Controller application registers.
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: config
+ - const: app
+
+ ranges:
+ description: Ranges for the PCI memory and I/O regions.
+
+ resets:
+ maxItems: 1
+
+ clocks:
+ description: PCIe registers interface clock.
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: phy
+
+ reset-gpios:
+ maxItems: 1
+
+ num-lanes:
+ description: Number of lanes to use for this port.
+
+ linux,pci-domain:
+ description: PCI domain ID.
+
+ interrupts:
+ description: PCIe core integrated miscellaneous interrupt.
+
+ interrupt-map-mask:
+ description: Standard PCI IRQ mapping properties.
+
+ interrupt-map:
+ description: Standard PCI IRQ mapping properties.
+
+ max-link-speed:
+ description: Specify PCI Gen for link capability.
+
+ bus-range:
+ description: Range of bus numbers associated with this controller.
+
+ intel,rst-interval:
+ description: |
+ Device reset interval in ms. Some devices need an interval upto 500ms.
+ By default it is 100ms.
+
+required:
+ - compatible
+ - device_type
+ - reg
+ - reg-names
+ - ranges
+ - resets
+ - clocks
+ - phys
+ - phy-names
+ - reset-gpios
+ - num-lanes
+ - linux,pci-domain
+ - interrupts
+ - interrupt-map
+ - interrupt-map-mask
+
+examples:
+ - |
+ pcie10:pcie@d0e00000 {
+ compatible = "intel,lgm-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <
+ 0xd0e00000 0x1000
+ 0xd2000000 0x800000
+ 0xd0a41000 0x1000
+ >;
+ reg-names = "dbi", "config", "app";
+ linux,pci-domain = <0>;
+ max-link-speed = <4>;
+ bus-range = <0x00 0x08>;
+ interrupt-parent = <&ioapic1>;
+ interrupts = <67 1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &ioapic1 27 1>,
+ <0 0 0 2 &ioapic1 28 1>,
+ <0 0 0 3 &ioapic1 29 1>,
+ <0 0 0 4 &ioapic1 30 1>;
+ ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
+ resets = <&rcu0 0x50 0>;
+ clocks = <&cgu0 LGM_GCLK_PCIE10>;
+ phys = <&cb0phy0>;
+ phy-names = "phy";
+ };
+
+ &pcie10 {
+ status = "okay";
+ intel,rst-interval = <100>;
+ reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ num-lanes = <2>;
+ };
--
2.11.0
\
 
 \ /
  Last update: 2019-08-20 11:41    [W:1.592 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site