lkml.org 
[lkml]   [2019]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] media: saa7134: fix terminology around saa7134_i2c_eeprom_md7134_gate()
Date
saa7134_i2c_eeprom_md7134_gate() function and the associated comment uses
an inverted i2c gate open / closed terminology.
Let's fix this.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
---
drivers/media/pci/saa7134/saa7134-i2c.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/media/pci/saa7134/saa7134-i2c.c b/drivers/media/pci/saa7134/saa7134-i2c.c
index 493b1858815f..1414d580c98f 100644
--- a/drivers/media/pci/saa7134/saa7134-i2c.c
+++ b/drivers/media/pci/saa7134/saa7134-i2c.c
@@ -342,7 +342,11 @@ static const struct i2c_client saa7134_client_template = {

/* ----------------------------------------------------------- */

-/* On Medion 7134 reading EEPROM needs DVB-T demod i2c gate open */
+/*
+ * On Medion 7134 reading the SAA7134 chip config EEPROM needs DVB-T
+ * demod i2c gate closed due to an address clash between this EEPROM
+ * and the demod one.
+ */
static void saa7134_i2c_eeprom_md7134_gate(struct saa7134_dev *dev)
{
u8 subaddr = 0x7, dmdregval;
@@ -359,13 +363,13 @@ static void saa7134_i2c_eeprom_md7134_gate(struct saa7134_dev *dev)

ret = i2c_transfer(&dev->i2c_adap, i2cgatemsg_r, 2);
if ((ret == 2) && (dmdregval & 0x2)) {
- pr_debug("%s: DVB-T demod i2c gate was left closed\n",
+ pr_debug("%s: DVB-T demod i2c gate was left open\n",
dev->name);

data[0] = subaddr;
data[1] = (dmdregval & ~0x2);
if (i2c_transfer(&dev->i2c_adap, i2cgatemsg_w, 1) != 1)
- pr_err("%s: EEPROM i2c gate open failure\n",
+ pr_err("%s: EEPROM i2c gate close failure\n",
dev->name);
}
}
\
 
 \ /
  Last update: 2019-08-21 00:08    [W:0.036 / U:4.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site