lkml.org 
[lkml]   [2019]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [v2 PATCH] RISC-V: Optimize tlb flush path.
Date
On Tue, 2019-08-20 at 14:21 +0530, Anup Patel wrote:
> On Tue, Aug 20, 2019 at 6:17 AM Atish Patra <atish.patra@wdc.com>
> wrote:
> > In RISC-V, tlb flush happens via SBI which is expensive.
> > If the target cpumask contains a local hartid, some cost
> > can be saved by issuing a local tlb flush as we do that
> > in OpenSBI anyways. There is also no need of SBI call if
> > cpumask is empty.
> >
> > Do a local flush first if current cpu is present in cpumask.
> > Invoke SBI call only if target cpumask contains any cpus
> > other than local cpu.
> >
> > Signed-off-by: Atish Patra <atish.patra@wdc.com>
> > ---
> > arch/riscv/include/asm/tlbflush.h | 37 ++++++++++++++++++++++++++-
> > ----
> > 1 file changed, 31 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/riscv/include/asm/tlbflush.h
> > b/arch/riscv/include/asm/tlbflush.h
> > index b5e64dc19b9e..3f9cd17b5402 100644
> > --- a/arch/riscv/include/asm/tlbflush.h
> > +++ b/arch/riscv/include/asm/tlbflush.h
> > @@ -8,6 +8,7 @@
> > #define _ASM_RISCV_TLBFLUSH_H
> >
> > #include <linux/mm_types.h>
> > +#include <linux/sched.h>
> > #include <asm/smp.h>
> >
> > /*
> > @@ -42,20 +43,44 @@ static inline void flush_tlb_range(struct
> > vm_area_struct *vma,
> >
> > #include <asm/sbi.h>
> >
> > -static inline void remote_sfence_vma(struct cpumask *cmask,
> > unsigned long start,
> > - unsigned long size)
> > +static void __riscv_flush_tlb(struct cpumask *cmask, unsigned long
> > start,
> > + unsigned long size)
> > {
> > struct cpumask hmask;
> > + unsigned int hartid;
> > + unsigned int cpuid;
> >
> > cpumask_clear(&hmask);
> > +
> > + if (!cmask) {
> > + riscv_cpuid_to_hartid_mask(cpu_online_mask,
> > &hmask);
> > + goto issue_sfence;
> > + }
> > +
> > + cpuid = get_cpu();
> > + if (cpumask_test_cpu(cpuid, cmask)) {
> > + /* Save trap cost by issuing a local tlb flush here
> > */
> > + if ((start == 0 && size == -1) || (size >
> > PAGE_SIZE))
> > + local_flush_tlb_all();
> > + else if (size == PAGE_SIZE)
> > + local_flush_tlb_page(start);
> > + }
> > + if (cpumask_any_but(cmask, cpuid) >= nr_cpu_ids)
> > + goto done;
> > +
> > riscv_cpuid_to_hartid_mask(cmask, &hmask);
> > + hartid = cpuid_to_hartid_map(cpuid);
> > + cpumask_clear_cpu(hartid, &hmask);
> > +
> > +issue_sfence:
> > sbi_remote_sfence_vma(hmask.bits, start, size);
> > +done:
> > + put_cpu();
> > }
> >
> > -#define flush_tlb_all() sbi_remote_sfence_vma(NULL, 0, -1)
> > -
> > +#define flush_tlb_all() __riscv_flush_tlb(NULL, 0, -1)
> > #define flush_tlb_range(vma, start, end) \
> > - remote_sfence_vma(mm_cpumask((vma)->vm_mm), start, (end) -
> > (start))
> > + __riscv_flush_tlb(mm_cpumask((vma)->vm_mm), start, (end) -
> > (start))
> >
> > static inline void flush_tlb_page(struct vm_area_struct *vma,
> > unsigned long addr) {
> > @@ -63,7 +88,7 @@ static inline void flush_tlb_page(struct
> > vm_area_struct *vma,
> > }
> >
> > #define flush_tlb_mm(mm) \
> > - remote_sfence_vma(mm_cpumask(mm), 0, -1)
> > + __riscv_flush_tlb(mm_cpumask(mm), 0, -1)
> >
> > #endif /* CONFIG_SMP */
> >
> > --
> > 2.21.0
> >
>
> I think we should move __riscv_flush_tlb() to mm/tlbflush.c because
> it's quite
> big now.
>
> In future, we will also have __riscv_flush_tlb_asid() which will
> flush TLB based
> on ASID.
>

Sounds good to me. Christoph has already mm/tlbflush.c in his mmu
series. I will rebase on top of it.

> Regards,
> Anup

--
Regards,
Atish
\
 
 \ /
  Last update: 2019-08-20 22:29    [W:0.106 / U:3.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site