lkml.org 
[lkml]   [2019]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 6/6] arm64: dts: add support for SM1 based SEI Robotics SEI610
Hi Neil,

On Tue, Aug 20, 2019 at 4:43 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add support for the Amlogic SM1 Based SEI610 board.
>
> The SM1 SoC is a derivative of the G12A SoC Family with :
> - Cortex-A55 core instead of A53
> - more power domains, including USB & PCIe
> - a neural network co-processor (NNA)
> - a CSI input and image processor
> - some changes in the audio complex, thus not yet enabled
>
> The SEI610 board is a derivative of the SEI510 board with :
> - removed ADC based touch button, replaced with 3x GPIO buttons
> - physical switch disabling on-board MICs
> - USB-C port for USB 2.0 OTG
> - On-board FTDI USB2SERIAL port for Linux console
>
> Audio, Display and USB support will be added later when support of the
> corresponding power domains will be added, for now they are kept disabled.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
I don't have any details about this board but overall this looks sane, so:
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[...]
> + /* Used by Tuner, RGB Led & IR Emitter LED array */
> + vddao_3v3_t: regultor-vddao_3v3_t {
that should be regulator-vddao_3v3_t - maybe Kevin can fix this up, if
not then we can still fix it with a follow-up patch


Martin

\
 
 \ /
  Last update: 2019-08-20 22:14    [W:0.119 / U:47.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site