lkml.org 
[lkml]   [2019]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCHv2 0/4] Layerscape: Remove num-lanes property from PCIe nodes
Date
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

On FSL Layerscape SoCs, the number of lanes assigned to PCIe
controller is not fixed, it is determined by the selected
SerDes protocol. The current num-lanes indicates the max lanes
PCIe controller can support up to, instead of the lanes assigned
to the PCIe controller. This can result in PCIe link training fail
after hot-reset.

Hou Zhiqiang (4):
dt-bindings: PCI: designware: Remove the num-lanes from Required
properties
PCI: dwc: Return directly when num-lanes is not found
ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes
arm64: dts: fsl: Remove num-lanes property from PCIe nodes

Documentation/devicetree/bindings/pci/designware-pcie.txt | 1 -
arch/arm/boot/dts/ls1021a.dtsi | 2 --
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 -
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 ---
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 6 ------
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 3 ---
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ----
drivers/pci/controller/dwc/pcie-designware.c | 6 ++++--
8 files changed, 4 insertions(+), 22 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2019-08-20 09:28    [W:0.181 / U:4.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site