lkml.org 
[lkml]   [2019]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH V2 1/1] mmc: sdhci: Fix O2 Host data read/write DLL lock Phase shift issue
Date
Hi, Adrian,

Firstly, really appreciate for your valuable suggestions.

For your question that " Tuning will be executed whenever the system resumes, which is not an error. Can you explain when error recovery is needed,
and how this patch works."

We have blow questions need your help.

1. In which cases card initialization module(mmc_init_card) will be called after first init completed exclude error happened? Whether the case is Resume from idle or sleep, any case else?
In which cases tuning module(execute_tuning) will be called after first init completed exclude error happened? Whether the case is Resume from idle or sleep, any case else?

Because in Bayhub driver, once tuning module is called exclude first initialization the tuning call will be thought as error recovery tuning.

2. If the tuning and initialization are called cases are not clearly, can we get the mmc_blk_request error status(block request error) in tuning module?

What method can be used to get the structure mmc_blk_request in tuning module(execute_tuning)

3. If there is no method to get the block request error status in tuning module, we want to add a variable to save the error status during block request,
and use it in tuning module as the condition to call Bayhub dll recovery.

So which structure the variable should be added, and how to acquire it in mmc_blk_mq_rw_recovery, how to acquire it in execute_tuning.

Looking forward to your reply!

Thanks,
Chevron


-----Original Message-----
From: Adrian Hunter [mailto:adrian.hunter@intel.com]
Sent: 2019年7月29日 20:13
To: Shirley Her (SC); Ulf Hansson; linux-mmc@vger.kernel.org; linux-kernel@vger.kernel.org
Cc: Louis Lu (TP); Max Huang (SC); Chevron Li (WH)
Subject: Re: [PATCH V2 1/1] mmc: sdhci: Fix O2 Host data read/write DLL lock Phase shift issue

On 26/07/19 9:48 PM, Shirley Her (SC) wrote:
> Fix data read/write error in HS200 mode due to chip DLL lock phase
> shift

More explanation is needed. See comment below where
sdhci_o2_error_recovery() is called.

>
> Signed-off-by:Shirley Her<shirley.her@bayhubtech.com>
> ---
> change in V2:
> 1. Use usleep_range instead of udelay
> 2. move dll_adjust_count to sdhci-pci-o2micro.c
>
> change in V1:
> 1. Add error recovery function to relock the DLL with correct phase
> 2. Retuning HS200 after DLL locked
> ---
> ---
> drivers/mmc/host/sdhci-pci-o2micro.c | 157
> +++++++++++++++++++++++++++++------
> 1 file changed, 133 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c
> b/drivers/mmc/host/sdhci-pci-o2micro.c
> index 9dc4548..c43b2ce 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> @@ -51,13 +51,60 @@
> #define O2_SD_VENDOR_SETTING2 0x1C8
> #define O2_SD_HW_TUNING_DISABLE BIT(4)
>
> -#define O2_PLL_WDT_CONTROL1 0x1CC
> +#define O2_PLL_DLL_WDT_CONTROL1 0x1CC

Renaming O2_PLL_WDT_CONTROL1 should be a separate patch.

> #define O2_PLL_FORCE_ACTIVE BIT(18)
> #define O2_PLL_LOCK_STATUS BIT(14)
> #define O2_PLL_SOFT_RESET BIT(12)
> +#define O2_DLL_LOCK_STATUS BIT(11)
>
> #define O2_SD_DETECT_SETTING 0x324
>
> +static const u32 dmdn_table[5] = {0x25100000, 0x2B1C0000,
> + 0x2C1A0000, 0x371B0000, 0x35100000}; static u8 dll_adjust_count;

This should be in a struct:

struct o2_host {
u8 dll_adjust_count;
}


> +static int sdhci_o2_get_cd(struct mmc_host *mmc);

Please make a separate patch that reorders the functions so that forward declaration of sdhci_o2_get_cd() is not necessary.

> +
> +static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32
> +value) {
> + u32 scratch_32;
> +
> + pci_read_config_dword(chip->pdev,
> + O2_SD_PLL_SETTING, &scratch_32);
> +
> + scratch_32 &= 0x0000FFFF;
> + scratch_32 |= value;
> +
> + pci_write_config_dword(chip->pdev,
> + O2_SD_PLL_SETTING, scratch_32); }
> +
> +static int sdhci_o2_wait_dll_detect_lock(struct sdhci_host *host) {
> + ktime_t timeout;
> + u32 scratch32;
> +
> + usleep_range(5000, 6000);
> + scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
> + if (!(scratch32 & O2_DLL_LOCK_STATUS)) {
> + pr_warn("%s: DLL is still unlocked after wait 5ms\n",
> + mmc_hostname(host->mmc));
> + }
> +
> + /* Detect 500 ms */
> + timeout = ktime_add_ms(ktime_get(), 500);
> + while (1) {
> + bool timedout = ktime_after(ktime_get(), timeout);
> +
> + scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
> + if (!(scratch32 & O2_DLL_LOCK_STATUS))
> + return 0;
> +
> + if (timedout)
> + return 1;
> + usleep_range(10, 1000);
> + }
> +}
> +
> static void sdhci_o2_set_tuning_mode(struct sdhci_host *host) {
> u16 reg;
> @@ -95,11 +142,85 @@ static void __sdhci_o2_execute_tuning(struct sdhci_host *host, u32 opcode)
> sdhci_reset_tuning(host);
> }
>
> +static int sdhci_o2_error_recovery(struct sdhci_pci_chip *chip,
> + struct sdhci_host *host)
> +{
> + int ret = 0;
> + u8 scratch_8 = 0;
> + u32 scratch_32 = 0;

Please add a blank line after local variable declaration

> + /* Disable clock */
> + sdhci_writeb(host, 0, SDHCI_CLOCK_CONTROL);
> +
> +DLL_ADJUST:

Please use a 'do', 'for' or 'while' loop.

> + if (dll_adjust_count >= 5) {
> + dll_adjust_count = 4;
> + pr_warn("%s: error recovery failed with the dll_adjust_count over max value.\n",
> + mmc_hostname(host->mmc));

Isn't it necessary to exit the loop here?

> + }
> +
> + /* UnLock WP */
> + ret = pci_read_config_byte(chip->pdev,
> + O2_SD_LOCK_WP, &scratch_8);
> + if (ret)
> + return ret;
> +
> + scratch_8 &= 0x7f;
> + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
> +
> + /* PLL software reset */
> + scratch_32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
> + scratch_32 |= O2_PLL_SOFT_RESET;
> + sdhci_writel(host, scratch_32, O2_PLL_DLL_WDT_CONTROL1);
> +
> + ret = pci_read_config_dword(chip->pdev,
> + O2_SD_FUNC_REG4,
> + &scratch_32);
> + /* Enable Base Clk setting change */
> + scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
> + pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG4, scratch_32);
> + o2_pci_set_baseclk(chip, dmdn_table[dll_adjust_count]);
> +
> +

Please don't use multiple blank lines

> + /* Enable internal clock */
> + scratch_8 = SDHCI_CLOCK_INT_EN;
> + sdhci_writeb(host, scratch_8, SDHCI_CLOCK_CONTROL);
> +
> + if (sdhci_o2_get_cd(host->mmc)) {
> + if (sdhci_o2_wait_dll_detect_lock(host)) {
> + scratch_8 |= SDHCI_CLOCK_CARD_EN;
> + sdhci_writeb(host, scratch_8, SDHCI_CLOCK_CONTROL);
> + ret = 1;
> + } else {
> +

Blank lines aren't necessary after an open brace '{'

> + pr_warn("%s: DLL unlocked when dll_adjust_count is %d.\n",
> + mmc_hostname(host->mmc), dll_adjust_count);
> + dll_adjust_count++;
> + goto DLL_ADJUST;
> + }
> + } else
> + goto DLL_ADJUST;

braces {} should be used on all arms of this statement

> +
> + /* Lock WP */
> + ret = pci_read_config_byte(chip->pdev,
> + O2_SD_LOCK_WP, &scratch_8);
> + if (ret)
> + return ret;
> + scratch_8 |= 0x80;
> + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
> + return ret;
> +}
> +
> static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
> {
> struct sdhci_host *host = mmc_priv(mmc);
> + struct sdhci_pci_slot *slot = sdhci_priv(host);

This is how you get a reference to o2_host:

struct o2_host *o2_host = sdhci_pci_priv(slot);

> int current_bus_width = 0;
>
> +

Please don't use multiple blank lines

> + if (dll_adjust_count)

dll_adjust_count should be in struct o2_host

o2_host->dll_adjust_count

> + sdhci_o2_error_recovery(slot->chip, host);

Tuning will be executed whenever the system resumes, which is not an error.
Can you explain when error recovery is needed, and how this patch works.

> +
> + dll_adjust_count++;
> /*
> * This handler only implements the eMMC tuning that is specific to
> * this controller. Fall back to the standard method for other TIMING.
> @@ -131,23 +252,11 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
> mmc->ios.bus_width = MMC_BUS_WIDTH_8;
> sdhci_set_bus_width(host, current_bus_width);
> }
> -

Please avoid unrelated white space changes.

> host->flags &= ~SDHCI_HS400_TUNING;
> return 0;
> }
>
> -static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32
> value) -{
> - u32 scratch_32;
> - pci_read_config_dword(chip->pdev,
> - O2_SD_PLL_SETTING, &scratch_32);
>
> - scratch_32 &= 0x0000FFFF;
> - scratch_32 |= value;
> -
> - pci_write_config_dword(chip->pdev,
> - O2_SD_PLL_SETTING, scratch_32);
> -}
>
> static void o2_pci_led_enable(struct sdhci_pci_chip *chip) { @@
> -316,23 +425,23 @@ static void sdhci_o2_enable_internal_clock(struct sdhci_host *host)
> u32 scratch32;
>
> /* PLL software reset */
> - scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
> + scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
> scratch32 |= O2_PLL_SOFT_RESET;
> - sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> + sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
> udelay(1);
> scratch32 &= ~(O2_PLL_SOFT_RESET);
> - sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> + sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
>
> /* PLL force active */
> scratch32 |= O2_PLL_FORCE_ACTIVE;
> - sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> + sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
>
> /* Wait max 20 ms */
> timeout = ktime_add_ms(ktime_get(), 20);
> while (1) {
> bool timedout = ktime_after(ktime_get(), timeout);
>
> - scratch = sdhci_readw(host, O2_PLL_WDT_CONTROL1);
> + scratch = sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1);
> if (scratch & O2_PLL_LOCK_STATUS)
> break;
> if (timedout) {
> @@ -350,16 +459,16 @@ static void
> sdhci_o2_enable_internal_clock(struct sdhci_host *host)
>
> out:
> /* Cancel PLL force active */
> - scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
> + scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
> scratch32 &= ~O2_PLL_FORCE_ACTIVE;
> - sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> + sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
> }
>
> static int sdhci_o2_get_cd(struct mmc_host *mmc) {
> struct sdhci_host *host = mmc_priv(mmc);
> -

Please keep the blank line after declarations.

> - sdhci_o2_enable_internal_clock(host);
> + if (!(sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1) & O2_PLL_LOCK_STATUS))
> + sdhci_o2_enable_internal_clock(host);
>
> return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
> SDHCI_CARD_PRESENT); } @@ -369,7 +478,7 @@ static void
> sdhci_o2_enable_clk(struct sdhci_host *host, u16 clk)
> /* Enable internal clock */
> clk |= SDHCI_CLOCK_INT_EN;
> sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> -
> + sdhci_o2_enable_internal_clock(host);
> if (sdhci_o2_get_cd(host->mmc)) {
> clk |= SDHCI_CLOCK_CARD_EN;
> sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); @@ -400,7 +509,7 @@
> int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
>
> chip = slot->chip;
> host = slot->host;
> -
> + dll_adjust_count = 0;
> caps = sdhci_readl(host, SDHCI_CAPABILITIES);
>
> /*
>

Set up o2_host like this:

diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c
b/drivers/mmc/host/sdhci-pci-o2micro.c
index c43b2cecdf30..cfe57f23dcf1 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -796,4 +796,5 @@ const struct sdhci_pci_fixes sdhci_o2 = {
.resume = sdhci_pci_o2_resume,
#endif
.ops = &sdhci_pci_o2_ops,
+ .priv_size = sizeof(struct o2_host),
};
\
 
 \ /
  Last update: 2019-08-02 12:55    [W:0.083 / U:2.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site