lkml.org 
[lkml]   [2019]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.4 089/158] net: bcmgenet: use promisc for unsupported filters
Date
From: Justin Chen <justinpopo6@gmail.com>

[ Upstream commit 35cbef9863640f06107144687bd13151bc2e8ce3 ]

Currently we silently ignore filters if we cannot meet the filter
requirements. This will lead to the MAC dropping packets that are
expected to pass. A better solution would be to set the NIC to promisc
mode when the required filters cannot be met.

Also correct the number of MDF filters supported. It should be 17,
not 16.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 57 +++++++++++--------------
1 file changed, 26 insertions(+), 31 deletions(-)

--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3090,39 +3090,42 @@ static void bcmgenet_timeout(struct net_
netif_tx_wake_all_queues(dev);
}

-#define MAX_MC_COUNT 16
+#define MAX_MDF_FILTER 17

static inline void bcmgenet_set_mdf_addr(struct bcmgenet_priv *priv,
unsigned char *addr,
- int *i,
- int *mc)
+ int *i)
{
- u32 reg;
-
bcmgenet_umac_writel(priv, addr[0] << 8 | addr[1],
UMAC_MDF_ADDR + (*i * 4));
bcmgenet_umac_writel(priv, addr[2] << 24 | addr[3] << 16 |
addr[4] << 8 | addr[5],
UMAC_MDF_ADDR + ((*i + 1) * 4));
- reg = bcmgenet_umac_readl(priv, UMAC_MDF_CTRL);
- reg |= (1 << (MAX_MC_COUNT - *mc));
- bcmgenet_umac_writel(priv, reg, UMAC_MDF_CTRL);
*i += 2;
- (*mc)++;
}

static void bcmgenet_set_rx_mode(struct net_device *dev)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
struct netdev_hw_addr *ha;
- int i, mc;
+ int i, nfilter;
u32 reg;

netif_dbg(priv, hw, dev, "%s: %08X\n", __func__, dev->flags);

- /* Promiscuous mode */
+ /* Number of filters needed */
+ nfilter = netdev_uc_count(dev) + netdev_mc_count(dev) + 2;
+
+ /*
+ * Turn on promicuous mode for three scenarios
+ * 1. IFF_PROMISC flag is set
+ * 2. IFF_ALLMULTI flag is set
+ * 3. The number of filters needed exceeds the number filters
+ * supported by the hardware.
+ */
reg = bcmgenet_umac_readl(priv, UMAC_CMD);
- if (dev->flags & IFF_PROMISC) {
+ if ((dev->flags & (IFF_PROMISC | IFF_ALLMULTI)) ||
+ (nfilter > MAX_MDF_FILTER)) {
reg |= CMD_PROMISC;
bcmgenet_umac_writel(priv, reg, UMAC_CMD);
bcmgenet_umac_writel(priv, 0, UMAC_MDF_CTRL);
@@ -3132,32 +3135,24 @@ static void bcmgenet_set_rx_mode(struct
bcmgenet_umac_writel(priv, reg, UMAC_CMD);
}

- /* UniMac doesn't support ALLMULTI */
- if (dev->flags & IFF_ALLMULTI) {
- netdev_warn(dev, "ALLMULTI is not supported\n");
- return;
- }
-
/* update MDF filter */
i = 0;
- mc = 0;
/* Broadcast */
- bcmgenet_set_mdf_addr(priv, dev->broadcast, &i, &mc);
+ bcmgenet_set_mdf_addr(priv, dev->broadcast, &i);
/* my own address.*/
- bcmgenet_set_mdf_addr(priv, dev->dev_addr, &i, &mc);
- /* Unicast list*/
- if (netdev_uc_count(dev) > (MAX_MC_COUNT - mc))
- return;
+ bcmgenet_set_mdf_addr(priv, dev->dev_addr, &i);

- if (!netdev_uc_empty(dev))
- netdev_for_each_uc_addr(ha, dev)
- bcmgenet_set_mdf_addr(priv, ha->addr, &i, &mc);
- /* Multicast */
- if (netdev_mc_empty(dev) || netdev_mc_count(dev) >= (MAX_MC_COUNT - mc))
- return;
+ /* Unicast */
+ netdev_for_each_uc_addr(ha, dev)
+ bcmgenet_set_mdf_addr(priv, ha->addr, &i);

+ /* Multicast */
netdev_for_each_mc_addr(ha, dev)
- bcmgenet_set_mdf_addr(priv, ha->addr, &i, &mc);
+ bcmgenet_set_mdf_addr(priv, ha->addr, &i);
+
+ /* Enable filters */
+ reg = GENMASK(MAX_MDF_FILTER - 1, MAX_MDF_FILTER - nfilter);
+ bcmgenet_umac_writel(priv, reg, UMAC_MDF_CTRL);
}

/* Set the hardware MAC address. */

\
 
 \ /
  Last update: 2019-08-02 11:39    [W:0.440 / U:3.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site