[lkml]   [2019]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 6/6] tpm: Add driver for cr50 on I2C
On Tue, Jul 16, 2019 at 03:45:18PM -0700, Stephen Boyd wrote:
> From: Duncan Laurie <>
> Add TPM 2.0 compatible I2C interface for chips with cr50 firmware.
> The firmware running on the currently supported H1 MCU requires a
> special driver to handle its specific protocol, and this makes it
> unsuitable to use tpm_tis_core_* and instead it must implement the
> underlying TPM protocol similar to the other I2C TPM drivers.
> - All 4 byes of status register must be read/written at once.
> - FIFO and burst count is limited to 63 and must be drained by AP.
> - Provides an interrupt to indicate when read response data is ready
> and when the TPM is finished processing write data.
> This driver is based on the existing infineon I2C TPM driver, which
> most closely matches the cr50 i2c protocol behavior. The driver is
> intentionally kept very similar in structure and style to the
> corresponding drivers in coreboot and depthcharge.
> Signed-off-by: Duncan Laurie <>
> [ Depend on i2c even if it's a module, replace
> boilier plate with SPDX tag, drop asm/byteorder.h include, simplify
> return from probe]
> Signed-off-by: Stephen Boyd <>

Apologies. I missed this when I stated my comment about SPI.


 \ /
  Last update: 2019-08-02 22:45    [W:0.214 / U:31.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site