lkml.org 
[lkml]   [2019]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH/RFC 03/12] dt-bindings: panel: lvds: Add dual-link LVDS display support
Date
Dual-link LVDS displays have two ports, therefore document this
with the bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
.../bindings/display/panel/panel-lvds.txt | 91 ++++++++++++++++------
1 file changed, 67 insertions(+), 24 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
index 250850a..07795441 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
+++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
@@ -41,7 +41,8 @@ Required nodes:

- panel-timing: See panel-common.txt.
- ports: See panel-common.txt. These bindings require a single port subnode
- corresponding to the panel LVDS input.
+ (for a single link display) or two port subnodes (for a dual link display)
+ corresponding to the panel LVDS input(s).


LVDS data mappings are defined as follows.
@@ -92,30 +93,72 @@ CTL3: 0
Example
-------

-panel {
- compatible = "mitsubishi,aa121td01", "panel-lvds";
-
- width-mm = <261>;
- height-mm = <163>;
-
- data-mapping = "jeida-24";
-
- panel-timing {
- /* 1280x800 @60Hz */
- clock-frequency = <71000000>;
- hactive = <1280>;
- vactive = <800>;
- hsync-len = <70>;
- hfront-porch = <20>;
- hback-porch = <70>;
- vsync-len = <5>;
- vfront-porch = <3>;
- vback-porch = <15>;
+Single port:
+ panel {
+ compatible = "mitsubishi,aa121td01", "panel-lvds";
+
+ width-mm = <261>;
+ height-mm = <163>;
+
+ data-mapping = "jeida-24";
+
+ panel-timing {
+ /* 1280x800 @60Hz */
+ clock-frequency = <71000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hsync-len = <70>;
+ hfront-porch = <20>;
+ hback-porch = <70>;
+ vsync-len = <5>;
+ vfront-porch = <3>;
+ vback-porch = <15>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_encoder>;
+ };
+ };
};

- port {
- panel_in: endpoint {
- remote-endpoint = <&lvds_encoder>;
+Two ports:
+ panel {
+ compatible = "advantech,idk-2121wr", "panel-lvds";
+
+ width-mm = <476>;
+ height-mm = <268>;
+
+ data-mapping = "vesa-24";
+
+ panel-timing {
+ clock-frequency = <148500000>;
+ hactive = <1920>;
+ vactive = <1080>;
+ hsync-len = <44>;
+ hfront-porch = <88>;
+ hback-porch = <148>;
+ vfront-porch = <4>;
+ vback-porch = <36>;
+ vsync-len = <5>;
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds1_panel_in: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
};
};
-};
--
2.7.4
\
 
 \ /
  Last update: 2019-08-02 09:35    [W:0.132 / U:8.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site