[lkml]   [2019]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH net-next 0/1] Add BASE-T1 PHY support
This patch adds basic support for BASE-T1 PHYs in the framework.
BASE-T1 PHYs main area of application are automotive and industrial.
BASE-T1 is standardized in IEEE 802.3, namely
- IEEE 802.3bw: 100BASE-T1
- IEEE 802.3bp 1000BASE-T1
- IEEE 802.3cg: 10BASE-T1L and 10BASE-T1S

There are no products which contain BASE-T1 and consumer type PHYs like
1000BASE-T. However, devices exist which combine 100BASE-T1 and 1000BASE-T1
PHYs with auto-negotiation.

The intention of this patch is to make use of the existing Clause 45 functions.
BASE-T1 adds some additional registers e.g. for aneg control, which follow a
similiar register layout as the existing devices. The bits which are used in
BASE-T1 specific registers are the same as in basic registers, thus the
existing functions can be resued, with get_aneg_ctrl() selecting the correct
register address.

The current version of ethtool has been prepared for 100/1000BASE-T1 and works
with this patch. 10BASE-T1 needs to be added to ethtool.

Christian Herber (1):
Added BASE-T1 PHY support to PHY Subsystem

drivers/net/phy/phy-c45.c | 113 +++++++++++++++++++++++++++++++----
drivers/net/phy/phy-core.c | 4 +-
include/uapi/linux/ethtool.h | 2 +
include/uapi/linux/mdio.h | 21 +++++++
4 files changed, 129 insertions(+), 11 deletions(-)


 \ /
  Last update: 2019-08-15 17:33    [W:0.226 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site