lkml.org 
[lkml]   [2019]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v6 1/9] PCI/ERR: Update error status after reset_link()
On Fri, Jul 26, 2019 at 02:43:11PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>
> Commit bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") uses
> reset_link() to recover from fatal errors. But, if the reset is
> successful there is no need to continue the rest of the error recovery
> checks. Also, during fatal error recovery, if the initial value of error
> status is PCI_ERS_RESULT_DISCONNECT or PCI_ERS_RESULT_NO_AER_DRIVER then
> even after successful recovery (using reset_link()) pcie_do_recovery()
> will report the recovery result as failure. So update the status of
> error after reset_link().
>
> Fixes: bdb5ac85777d ("PCI/ERR: Handle fatal error recovery")
> Cc: Ashok Raj <ashok.raj@intel.com>
> Cc: Keith Busch <keith.busch@intel.com>
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> ---
> drivers/pci/pcie/err.c | 11 ++++++++---
> 1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> index 773197a12568..aecec124a829 100644
> --- a/drivers/pci/pcie/err.c
> +++ b/drivers/pci/pcie/err.c
> @@ -204,9 +204,13 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
> else
> pci_walk_bus(bus, report_normal_detected, &status);
>
> - if (state == pci_channel_io_frozen &&
> - reset_link(dev, service) != PCI_ERS_RESULT_RECOVERED)
> - goto failed;
> + if (state == pci_channel_io_frozen) {
> + status = reset_link(dev, service);
> + if (status != PCI_ERS_RESULT_RECOVERED)
> + goto failed;
> + else
> + goto done;

This will be easier to read without the negation, i.e.,

if (status == PCI_ERS_RESULT_RECOVERED)
goto done;
else
goto failed;

> + }
>
> if (status == PCI_ERS_RESULT_CAN_RECOVER) {
> status = PCI_ERS_RESULT_RECOVERED;
> @@ -228,6 +232,7 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
> if (status != PCI_ERS_RESULT_RECOVERED)
> goto failed;
>
> +done:
> pci_dbg(dev, "broadcast resume message\n");
> pci_walk_bus(bus, report_resume, &status);
>
> --
> 2.21.0
>

\
 
 \ /
  Last update: 2019-08-16 00:19    [W:0.135 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site