lkml.org 
[lkml]   [2019]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/3] Update pcengines-apuv2 platform device
From
Date
On 05.07.19 13:36, Florian Eckert wrote:

Hi,

> APU1 (PC-Engines) CPU "AMD G series T40E APU":> This is also an old design and is not recommend for new design>
(deprecated).> Also not many were produced and are in the field.> See
https://pcengines.ch/apu.htm
Yes, and I haven't been able to get one yet, so I dropped my original
plan of supporting this once. The gpio device is very different.

> Platform-Device (LEDs, Button):> I have no platform device description found in the linux sources.> So
the GPIO button should not work.
Talking about the old driver ? It only supports the three front LEDs
directly and conflicts w/ anything else that wants to support other
GPIOs.

> Platform-Device (LEDs, Button):
> This Platform description is only valid for APU2/APU3 and not for APU1.
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/platform/x86/pcengines-apuv2.c

Correct. If we really wanna support APUv1, that most likely become a
completely separate driver, as the chipsets are very different.

> LEDs-Driver:
> We have an additional device only for LEDs this works for APU1/APU2/APU3.
> I think we should remove the APU2/APU3 LEDs from the leds-apu device as
> mentioned above.
> So this device supports only the APU1 LEDs.

ACK.

> We could extend and/or rename the pcengienes-apuv2 device to support
> also APU3 and the newest APU4.

APUv3 already is supported. APUv4 again is pretty different, and I don't
have one yet. (if anybody convices pcengines to give me some boards,
I'll add support for them :))

> The APU3 does have an additional the simswap pin.

Already planned to add it, but not yet sorted into which subsystem it
actually belongs to.

> We should change this to the following layout and add the legacy GPIO
> numbering.

First we'll have to sort out where the new pins actually belong into.
(maybe power management / regulators for the reset pins ?)

> ALIX (PC-Engines) CPU "AMD Geode LX":
> This is an old design we have already in use and is not recommend for
> new design (deprecated)
> https://pcengines.ch/alix.htm

And it's an entirely different chipset, not related at all to apu.

> I think we should leave the driver as it is because this is a different
> design and has nothing to do with the PUs.

Yes.


--mtx

--
Enrico Weigelt, metux IT consult
Free software and Linux embedded engineering
info@metux.net -- +49-151-27565287

\
 
 \ /
  Last update: 2019-07-08 21:40    [W:0.102 / U:5.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site