lkml.org 
[lkml]   [2019]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] arm64: dts: bitmain: Add clock controller support for BM1880 SoC
Date
Add clock controller support for Bitmain BM1880 SoC.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index 86e73af1629c..d2edb2e28bf2 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -4,6 +4,7 @@
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
*/

+#include <dt-bindings/clock/bm1880-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {
@@ -65,6 +66,12 @@
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};

+ osc: osc {
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -93,6 +100,14 @@
reg = <0x400 0x120>;
};

+ clk: clock-controller {
+ compatible = "bitmain,bm1880-clk";
+ reg = <0xe8 0x0c>,<0x800 0xb0>;
+ reg-names = "pll", "sys";
+ clocks = <&osc>;
+ #clock-cells = <1>;
+ };
+
rst: reset-controller@c00 {
compatible = "bitmain,bm1880-reset";
reg = <0xc00 0x8>;
--
2.17.1
\
 
 \ /
  Last update: 2019-07-05 17:15    [W:0.093 / U:2.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site