lkml.org 
[lkml]   [2019]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] gpiolib: fix incorrect IRQ requesting of an active-low lineevent
Date
When a pin is active-low, logical trigger edge should be inverted
to match the same interrupt opportunity.

For example, a button pushed trigger falling edge in ACTIVE_HIGH
case; in ACTIVE_LOW case, the button pushed trigger rising edge.
For user space the IRQ requesting doesn't need to do any
modification except to configuring GPIOHANDLE_REQUEST_ACTIVE_LOW.

Signed-off-by: Michael Wu <michael.wu@vatics.com>
---
drivers/gpio/gpiolib.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index e013d417a936..b98466a05091 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -956,9 +956,11 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
}

if (eflags & GPIOEVENT_REQUEST_RISING_EDGE)
- irqflags |= IRQF_TRIGGER_RISING;
+ irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
+ IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
if (eflags & GPIOEVENT_REQUEST_FALLING_EDGE)
- irqflags |= IRQF_TRIGGER_FALLING;
+ irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
+ IRQ_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
irqflags |= IRQF_ONESHOT;

INIT_KFIFO(le->events);
--
2.17.1
\
 
 \ /
  Last update: 2019-07-05 11:39    [W:0.064 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site