lkml.org 
[lkml]   [2019]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 7/7] net: phy: realtek: configure RTL8211E LEDs
From
Date
On 03.07.2019 21:37, Matthias Kaehlcke wrote:
> Configure the RTL8211E LEDs behavior when the device tree property
> 'realtek,led-modes' is specified.
>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> ---
> Changes in v2:
> - patch added to the series
> ---
> drivers/net/phy/realtek.c | 63 +++++++++++++++++++++++++++++++++++++--
> 1 file changed, 61 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> index 45fee4612031..559aec547738 100644
> --- a/drivers/net/phy/realtek.c
> +++ b/drivers/net/phy/realtek.c
> @@ -9,6 +9,7 @@
> * Copyright (c) 2004 Freescale Semiconductor, Inc.
> */
> #include <linux/bitops.h>
> +#include <linux/bits.h>
> #include <linux/device.h>
> #include <linux/module.h>
> #include <linux/of.h>
> @@ -35,6 +36,15 @@
> #define RTL8211E_EEE_LED_MODE1 0x05
> #define RTL8211E_EEE_LED_MODE2 0x06
>
> +/* RTL8211E extension page 44 */
> +#define RTL8211E_LACR 0x1a
> +#define RLT8211E_LACR_LEDACTCTRL_SHIFT 4
> +#define RLT8211E_LACR_LEDACTCTRL_MASK GENMASK(6, 4)
> +#define RTL8211E_LCR 0x1c
> +#define RTL8211E_LCR_LEDCTRL_MASK (GENMASK(2, 0) | \
> + GENMASK(6, 4) | \
> + GENMASK(10, 8))
> +
> /* RTL8211E extension page 160 */
> #define RTL8211E_SCR 0x1a
> #define RTL8211E_SCR_DISABLE_RXC_SSC BIT(2)
> @@ -124,6 +134,56 @@ static int rtl8211e_disable_eee_led_mode(struct phy_device *phydev)
> return phy_restore_page(phydev, oldpage, ret);
> }
>
> +static int rtl8211e_config_leds(struct phy_device *phydev)
> +{
> + struct device *dev = &phydev->mdio.dev;
> + int count, i, oldpage, ret;
> + u16 lacr_bits = 0, lcr_bits = 0;
> +
> + if (!dev->of_node)
> + return 0;
> +
> + if (of_property_read_bool(dev->of_node, "realtek,eee-led-mode-disable"))
> + rtl8211e_disable_eee_led_mode(phydev);
> +
> + count = of_property_count_elems_of_size(dev->of_node,
> + "realtek,led-modes",
> + sizeof(u32));
> + if (count < 0 || count > 3)
> + return -EINVAL;
> +
> + for (i = 0; i < count; i++) {
> + u32 val;
> +
> + of_property_read_u32_index(dev->of_node,
> + "realtek,led-modes", i, &val);
> + lacr_bits |= (u16)(val >> 16) <<
> + (RLT8211E_LACR_LEDACTCTRL_SHIFT + i);

This may be done in an easier to read way:

if (val & RTL8211E_LINK_ACTIVITY)
lacr_bits |= BIT(RLT8211E_LACR_LEDACTCTRL_SHIFT + i);


> + lcr_bits |= (u16)(val & 0xf) << (i * 4);
> + }
> +
> + oldpage = rtl8211e_select_ext_page(phydev, 44);
> + if (oldpage < 0) {
> + dev_err(dev, "failed to select extended page: %d\n", oldpage);

In a PHY driver it may be more appropriate to use phydev_err() et al,
even though effectively it's the same.

> + goto err;
> + }
> +
> + ret = __phy_modify(phydev, RTL8211E_LACR,
> + RLT8211E_LACR_LEDACTCTRL_MASK, lacr_bits);
> + if (ret) {
> + dev_err(dev, "failed to write LACR reg: %d\n", ret);
> + goto err;
> + }
> +
> + ret = __phy_modify(phydev, RTL8211E_LCR,
> + RTL8211E_LCR_LEDCTRL_MASK, lcr_bits);
> + if (ret)
> + dev_err(dev, "failed to write LCR reg: %d\n", ret);
> +
> +err:
> + return phy_restore_page(phydev, oldpage, ret);
> +}
> +
> static int rtl8211e_config_init(struct phy_device *phydev)
> {
> struct device *dev = &phydev->mdio.dev;
> @@ -137,8 +197,7 @@ static int rtl8211e_config_init(struct phy_device *phydev)
> dev_err(dev, "failed to enable SSC on RXC: %d\n", ret);
> }
>
> - if (of_property_read_bool(dev->of_node, "realtek,eee-led-mode-disable"))
> - rtl8211e_disable_eee_led_mode(phydev);
> + rtl8211e_config_leds(phydev);
>
> return 0;
> }
>

\
 
 \ /
  Last update: 2019-07-03 22:29    [W:0.131 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site