lkml.org 
[lkml]   [2019]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/7] net: phy: realtek: Allow disabling RTL8211E EEE LED mode
Date
EEE LED mode is enabled by default on the RTL8211E. Disable it when
the device tree property 'realtek,eee-led-mode-disable' exists.

The magic values to disable EEE LED mode were taken from the RTL8211E
datasheet, unfortunately they are not further documented.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
Changes in v2:
- patch added to the series
---
drivers/net/phy/realtek.c | 37 ++++++++++++++++++++++++++++++++++++-
1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index a669945eb829..eb815cbe1e72 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -9,8 +9,9 @@
* Copyright (c) 2004 Freescale Semiconductor, Inc.
*/
#include <linux/bitops.h>
-#include <linux/phy.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>

#define RTL821x_PHYSR 0x11
#define RTL821x_PHYSR_DUPLEX BIT(13)
@@ -26,6 +27,10 @@
#define RTL821x_EXT_PAGE_SELECT 0x1e
#define RTL821x_PAGE_SELECT 0x1f

+/* RTL8211E page 5 */
+#define RTL8211E_EEE_LED_MODE1 0x05
+#define RTL8211E_EEE_LED_MODE2 0x06
+
#define RTL8211F_INSR 0x1d

#define RTL8211F_TX_DELAY BIT(8)
@@ -53,6 +58,35 @@ static int rtl821x_write_page(struct phy_device *phydev, int page)
return __phy_write(phydev, RTL821x_PAGE_SELECT, page);
}

+static int rtl8211e_disable_eee_led_mode(struct phy_device *phydev)
+{
+ int ret = 0;
+ int oldpage;
+
+ oldpage = phy_select_page(phydev, 5);
+ if (oldpage < 0)
+ goto out;
+
+ /* write magic values to disable EEE LED mode */
+ ret = __phy_write(phydev, RTL8211E_EEE_LED_MODE1, 0x8b82);
+ if (ret)
+ goto out;
+
+ ret = __phy_write(phydev, RTL8211E_EEE_LED_MODE2, 0x052b);
+
+out:
+ return phy_restore_page(phydev, oldpage, ret);
+}
+
+static int rtl8211e_config_init(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->mdio.dev;
+
+ if (of_property_read_bool(dev->of_node, "realtek,eee-led-mode-disable"))
+ rtl8211e_disable_eee_led_mode(phydev);
+
+ return 0;
+}
static int rtl8201_ack_interrupt(struct phy_device *phydev)
{
int err;
@@ -310,6 +344,7 @@ static struct phy_driver realtek_drvs[] = {
.name = "RTL8211E Gigabit Ethernet",
.config_init = &rtl8211e_config_init,
.ack_interrupt = &rtl821x_ack_interrupt,
+ .config_init = &rtl8211e_config_init,
.config_intr = &rtl8211e_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
--
2.22.0.410.gd8fdbe21b5-goog
\
 
 \ /
  Last update: 2019-07-03 21:39    [W:0.123 / U:0.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site