[lkml]   [2019]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v3] driver: core: Allow subsystems to continue deferring probe
On Fri, Jun 21, 2019 at 05:17:25PM +0200, Thierry Reding wrote:
> From: Thierry Reding <>
> Some subsystems, such as pinctrl, allow continuing to defer probe
> indefinitely. This is useful for devices that depend on resources
> provided by devices that are only probed after the init stage.
> One example of this can be seen on Tegra, where the DPAUX hardware
> contains pinmuxing controls for pins that it shares with an I2C
> controller. The I2C controller is typically used for communication
> with a monitor over HDMI (DDC). However, other instances of the I2C
> controller are used to access system critical components, such as a
> PMIC. The I2C controller driver will therefore usually be a builtin
> driver, whereas the DPAUX driver is part of the display driver that
> is loaded from a module to avoid bloating the kernel image with all
> of the DRM/KMS subsystem.
> In this particular case the pins used by this I2C/DDC controller
> become accessible very late in the boot process. However, since the
> controller is only used in conjunction with display, that's not an
> issue.
> Unfortunately the driver core currently outputs a warning message
> when a device fails to get the pinctrl before the end of the init
> stage. That can be confusing for the user because it may sound like
> an unwanted error occurred, whereas it's really an expected and
> harmless situation.
> In order to eliminate this warning, this patch allows callers of the
> driver_deferred_probe_check_state() helper to specify that they want
> to continue deferring probe, regardless of whether we're past the
> init stage or not. All of the callers of that function are updated
> for the new signature, but only the pinctrl subsystem passes a true
> value in the new persist parameter if appropriate.
> Signed-off-by: Thierry Reding <>
> Reviewed-by: Rafael J. Wysocki <>
> Reviewed-by: Linus Walleij <>
> ---
> Changes in v3:
> - add new function rather than extend the existing function with flags

Much nicer, thanks for making the changes!

greg k-h

 \ /
  Last update: 2019-07-03 21:30    [W:0.037 / U:11.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site