lkml.org 
[lkml]   [2019]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 1/4] net: dsa: Change DT bindings for Vitesse VSC73xx switches
From
Date


On 7/3/2019 1:57 AM, Pawel Dembicki wrote:
> This commit introduce how to use vsc73xx platform driver.
>
> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

Pawel, please resubmit your patches starting a new thread, not as reply
to the existing ones, see
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/networking/netdev-FAQ.rst#n134
for details. Also, David Miller typically likes to have a cover letter
for patch count > 1.

Thanks!

> ---
> Changes in v2:
> - Drop -spi and -platform suffix
> - Change commit message
>
> .../bindings/net/dsa/vitesse,vsc73xx.txt | 57 +++++++++++++++++--
> 1 file changed, 53 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
> index ed4710c40641..c55e0148657d 100644
> --- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
> +++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
> @@ -2,8 +2,8 @@ Vitesse VSC73xx Switches
> ========================
>
> This defines device tree bindings for the Vitesse VSC73xx switch chips.
> -The Vitesse company has been acquired by Microsemi and Microsemi in turn
> -acquired by Microchip but retains this vendor branding.
> +The Vitesse company has been acquired by Microsemi and Microsemi has
> +been acquired Microchip but retains this vendor branding.
>
> The currently supported switch chips are:
> Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
> @@ -11,8 +11,13 @@ Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
> Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
> Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
>
> -The device tree node is an SPI device so it must reside inside a SPI bus
> -device tree node, see spi/spi-bus.txt
> +This switch could have two different management interface.
> +
> +If SPI interface is used, the device tree node is an SPI device so it must
> +reside inside a SPI bus device tree node, see spi/spi-bus.txt
> +
> +If Platform driver is used, the device tree node is an platform device so it
> +must reside inside a platform bus device tree node.
>
> Required properties:
>
> @@ -38,6 +43,7 @@ and subnodes of DSA switches.
>
> Examples:
>
> +SPI:
> switch@0 {
> compatible = "vitesse,vsc7395";
> reg = <0>;
> @@ -79,3 +85,46 @@ switch@0 {
> };
> };
> };
> +
> +Platform:
> +switch@2,0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "vitesse,vsc7385";
> + reg = <0x2 0x0 0x20000>;
> + reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + label = "lan1";
> + };
> + port@1 {
> + reg = <1>;
> + label = "lan2";
> + };
> + port@2 {
> + reg = <2>;
> + label = "lan3";
> + };
> + port@3 {
> + reg = <3>;
> + label = "lan4";
> + };
> + vsc: port@6 {
> + reg = <6>;
> + label = "cpu";
> + ethernet = <&enet0>;
> + phy-mode = "rgmii";
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + pause;
> + };
> + };
> + };
> +
> +};
>

--
Florian
\
 
 \ /
  Last update: 2019-07-03 17:27    [W:0.093 / U:1.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site