lkml.org 
[lkml]   [2019]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v1 net-next] net: stmmac: enable clause 45 mdio support
On Thu, Jul 04, 2019 at 01:33:16AM +0000, Voon, Weifeng wrote:
> > > @@ -155,22 +171,26 @@ static int stmmac_mdio_read(struct mii_bus *bus,
> > int phyaddr, int phyreg)
> > > struct stmmac_priv *priv = netdev_priv(ndev);
> > > unsigned int mii_address = priv->hw->mii.addr;
> > > unsigned int mii_data = priv->hw->mii.data;
> > > - u32 v;
> > > - int data;
> > > u32 value = MII_BUSY;
> > > + int data = 0;
> > > + u32 v;
> > >
> > > value |= (phyaddr << priv->hw->mii.addr_shift)
> > > & priv->hw->mii.addr_mask;
> > > value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw-
> > >mii.reg_mask;
> > > value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
> > > & priv->hw->mii.clk_csr_mask;
> > > - if (priv->plat->has_gmac4)
> > > + if (priv->plat->has_gmac4) {
> > > value |= MII_GMAC4_READ;
> > > + if (phyreg & MII_ADDR_C45)
> > > + stmmac_mdio_c45_setup(priv, phyreg, &value, &data);
> > > + }
> > >
> > > if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v &
> > MII_BUSY),
> > > 100, 10000))
> > > return -EBUSY;
> > >
> > > + writel(data, priv->ioaddr + mii_data);
> >
> > That looks odd. Could you explain why it is needed.
> >
> > Thanks
> > Andrew
>
> Hi Andrew,
> This mdio c45 support needed to access DWC xPCS which is a Clause-45

I mean it looks odd doing a write to the data register in the middle
of stmmac_mdio_read().

Andrew

\
 
 \ /
  Last update: 2019-07-04 05:31    [W:0.062 / U:12.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site