lkml.org 
[lkml]   [2019]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 4/6] pwm: sun4i: Add support for H6 PWM
Date
Hi Uwe,

Dne ponedeljek, 29. julij 2019 ob 08:40:30 CEST je Uwe Kleine-König
napisal(a):
> On Fri, Jul 26, 2019 at 08:40:43PM +0200, Jernej Skrabec wrote:
> > Now that sun4i PWM driver supports deasserting reset line and enabling
> > bus clock, support for H6 PWM can be added.
> >
> > Note that while H6 PWM has two channels, only first one is wired to
> > output pin. Second channel is used as a clock source to companion AC200
> > chip which is bundled into same package.
> >
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > ---
> >
> > drivers/pwm/pwm-sun4i.c | 10 ++++++++++
> > 1 file changed, 10 insertions(+)
> >
> > diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
> > index 7d3ac3f2dc3f..9e0eca79ff88 100644
> > --- a/drivers/pwm/pwm-sun4i.c
> > +++ b/drivers/pwm/pwm-sun4i.c
> > @@ -331,6 +331,13 @@ static const struct sun4i_pwm_data
> > sun4i_pwm_single_bypass = {>
> > .npwm = 1,
> >
> > };
> >
> > +static const struct sun4i_pwm_data sun50i_pwm_dual_bypass_clk_rst = {
> > + .has_bus_clock = true,
> > + .has_prescaler_bypass = true,
> > + .has_reset = true,
> > + .npwm = 2,
> > +};
> > +
> >
> > static const struct of_device_id sun4i_pwm_dt_ids[] = {
> >
> > {
> >
> > .compatible = "allwinner,sun4i-a10-pwm",
> >
> > @@ -347,6 +354,9 @@ static const struct of_device_id sun4i_pwm_dt_ids[] =
> > {
> >
> > }, {
> >
> > .compatible = "allwinner,sun8i-h3-pwm",
> > .data = &sun4i_pwm_single_bypass,
> >
> > + }, {
> > + .compatible = "allwinner,sun50i-h6-pwm",
> > + .data = &sun50i_pwm_dual_bypass_clk_rst,
>
> If you follow my suggestion for the two previous patches, you can just
> use:
>
> compatible = "allwinner,sun50i-h6-pwm", "allwinner,sun5i-a10s-pwm";
>
> and drop this patch.

Maxime found out that it's not compatible with A10s due to difference in bypass
bit, but yes, I know what you mean.

Since H6 requires reset line and bus clock to be specified, it's not compatible
from DT binding side. New yaml based binding must somehow know that in order
to be able to validate DT node, so it needs standalone compatible. However,
depending on conclusions of other discussions, this new compatible can be
associated with already available quirks structure or have it's own.

Best regards,
Jernej

>
> Best regards
> Uwe
>
> > }, {
> >
> > /* sentinel */
> >
> > },




\
 
 \ /
  Last update: 2019-07-29 17:56    [W:0.059 / U:0.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site