lkml.org 
[lkml]   [2019]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH] spi: tle620x: remove stale driver
Date
This driver seems obsolte because this driver needs platform data
but no one in upstream passes it.

Link: https://lkml.org/lkml/2019/7/21/19
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

arch/arm/configs/s3c2410_defconfig | 1 -
drivers/spi/Kconfig | 9 -
drivers/spi/Makefile | 1 -
drivers/spi/spi-tle62x0.c | 317 -----------------------------
include/linux/spi/tle62x0.h | 12 --
5 files changed, 340 deletions(-)
delete mode 100644 drivers/spi/spi-tle62x0.c
delete mode 100644 include/linux/spi/tle62x0.h

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 95b5a4ffddea..45ee51f690be 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -270,7 +270,6 @@ CONFIG_SPI=y
CONFIG_SPI_GPIO=m
CONFIG_SPI_S3C24XX=m
CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_TLE62X0=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM85=m
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3a1d8f1170de..38e0651946c1 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -900,15 +900,6 @@ config SPI_LOOPBACK_TEST
primarily used for development of spi_master drivers
and to detect regressions

-config SPI_TLE62X0
- tristate "Infineon TLE62X0 (for power switching)"
- depends on SYSFS
- help
- SPI driver for Infineon TLE62X0 series line driver chips,
- such as the TLE6220, TLE6230 and TLE6240. This provides a
- sysfs interface, with each line presented as a kind of GPIO
- exposing both switch control and diagnostic feedback.
-
#
# Add new SPI protocol masters in alphabetical order above this line
#
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 63dcab552bcb..9566d896a4c8 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -110,7 +110,6 @@ obj-$(CONFIG_SPI_SYNQUACER) += spi-synquacer.o
obj-$(CONFIG_SPI_TEGRA114) += spi-tegra114.o
obj-$(CONFIG_SPI_TEGRA20_SFLASH) += spi-tegra20-sflash.o
obj-$(CONFIG_SPI_TEGRA20_SLINK) += spi-tegra20-slink.o
-obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o
spi-thunderx-objs := spi-cavium.o spi-cavium-thunderx.o
obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
diff --git a/drivers/spi/spi-tle62x0.c b/drivers/spi/spi-tle62x0.c
deleted file mode 100644
index 60dc69a39ace..000000000000
--- a/drivers/spi/spi-tle62x0.c
+++ /dev/null
@@ -1,317 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support Infineon TLE62x0 driver chips
- *
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks, <ben@simtec.co.uk>
- */
-
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/tle62x0.h>
-
-
-#define CMD_READ 0x00
-#define CMD_SET 0xff
-
-#define DIAG_NORMAL 0x03
-#define DIAG_OVERLOAD 0x02
-#define DIAG_OPEN 0x01
-#define DIAG_SHORTGND 0x00
-
-struct tle62x0_state {
- struct spi_device *us;
- struct mutex lock;
- unsigned int nr_gpio;
- unsigned int gpio_state;
-
- unsigned char tx_buff[4];
- unsigned char rx_buff[4];
-};
-
-static int to_gpio_num(struct device_attribute *attr);
-
-static inline int tle62x0_write(struct tle62x0_state *st)
-{
- unsigned char *buff = st->tx_buff;
- unsigned int gpio_state = st->gpio_state;
-
- buff[0] = CMD_SET;
-
- if (st->nr_gpio == 16) {
- buff[1] = gpio_state >> 8;
- buff[2] = gpio_state;
- } else {
- buff[1] = gpio_state;
- }
-
- dev_dbg(&st->us->dev, "buff %3ph\n", buff);
-
- return spi_write(st->us, buff, (st->nr_gpio == 16) ? 3 : 2);
-}
-
-static inline int tle62x0_read(struct tle62x0_state *st)
-{
- unsigned char *txbuff = st->tx_buff;
- struct spi_transfer xfer = {
- .tx_buf = txbuff,
- .rx_buf = st->rx_buff,
- .len = (st->nr_gpio * 2) / 8,
- };
- struct spi_message msg;
-
- txbuff[0] = CMD_READ;
- txbuff[1] = 0x00;
- txbuff[2] = 0x00;
- txbuff[3] = 0x00;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfer, &msg);
-
- return spi_sync(st->us, &msg);
-}
-
-static unsigned char *decode_fault(unsigned int fault_code)
-{
- fault_code &= 3;
-
- switch (fault_code) {
- case DIAG_NORMAL:
- return "N";
- case DIAG_OVERLOAD:
- return "V";
- case DIAG_OPEN:
- return "O";
- case DIAG_SHORTGND:
- return "G";
- }
-
- return "?";
-}
-
-static ssize_t tle62x0_status_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct tle62x0_state *st = dev_get_drvdata(dev);
- char *bp = buf;
- unsigned char *buff = st->rx_buff;
- unsigned long fault = 0;
- int ptr;
- int ret;
-
- mutex_lock(&st->lock);
- ret = tle62x0_read(st);
- dev_dbg(dev, "tle62x0_read() returned %d\n", ret);
- if (ret < 0) {
- mutex_unlock(&st->lock);
- return ret;
- }
-
- for (ptr = 0; ptr < (st->nr_gpio * 2)/8; ptr += 1) {
- fault <<= 8;
- fault |= ((unsigned long)buff[ptr]);
-
- dev_dbg(dev, "byte %d is %02x\n", ptr, buff[ptr]);
- }
-
- for (ptr = 0; ptr < st->nr_gpio; ptr++) {
- bp += sprintf(bp, "%s ", decode_fault(fault >> (ptr * 2)));
- }
-
- *bp++ = '\n';
-
- mutex_unlock(&st->lock);
- return bp - buf;
-}
-
-static DEVICE_ATTR(status_show, S_IRUGO, tle62x0_status_show, NULL);
-
-static ssize_t tle62x0_gpio_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct tle62x0_state *st = dev_get_drvdata(dev);
- int gpio_num = to_gpio_num(attr);
- int value;
-
- mutex_lock(&st->lock);
- value = (st->gpio_state >> gpio_num) & 1;
- mutex_unlock(&st->lock);
-
- return snprintf(buf, PAGE_SIZE, "%d", value);
-}
-
-static ssize_t tle62x0_gpio_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
-{
- struct tle62x0_state *st = dev_get_drvdata(dev);
- int gpio_num = to_gpio_num(attr);
- unsigned long val;
- char *endp;
-
- val = simple_strtoul(buf, &endp, 0);
- if (buf == endp)
- return -EINVAL;
-
- dev_dbg(dev, "setting gpio %d to %ld\n", gpio_num, val);
-
- mutex_lock(&st->lock);
-
- if (val)
- st->gpio_state |= 1 << gpio_num;
- else
- st->gpio_state &= ~(1 << gpio_num);
-
- tle62x0_write(st);
- mutex_unlock(&st->lock);
-
- return len;
-}
-
-static DEVICE_ATTR(gpio1, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio2, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio3, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio4, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio5, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio6, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio7, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio8, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio9, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio10, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio11, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio12, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio13, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio14, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio15, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio16, S_IWUSR|S_IRUGO,
- tle62x0_gpio_show, tle62x0_gpio_store);
-
-static struct device_attribute *gpio_attrs[] = {
- [0] = &dev_attr_gpio1,
- [1] = &dev_attr_gpio2,
- [2] = &dev_attr_gpio3,
- [3] = &dev_attr_gpio4,
- [4] = &dev_attr_gpio5,
- [5] = &dev_attr_gpio6,
- [6] = &dev_attr_gpio7,
- [7] = &dev_attr_gpio8,
- [8] = &dev_attr_gpio9,
- [9] = &dev_attr_gpio10,
- [10] = &dev_attr_gpio11,
- [11] = &dev_attr_gpio12,
- [12] = &dev_attr_gpio13,
- [13] = &dev_attr_gpio14,
- [14] = &dev_attr_gpio15,
- [15] = &dev_attr_gpio16
-};
-
-static int to_gpio_num(struct device_attribute *attr)
-{
- int ptr;
-
- for (ptr = 0; ptr < ARRAY_SIZE(gpio_attrs); ptr++) {
- if (gpio_attrs[ptr] == attr)
- return ptr;
- }
-
- return -1;
-}
-
-static int tle62x0_probe(struct spi_device *spi)
-{
- struct tle62x0_state *st;
- struct tle62x0_pdata *pdata;
- int ptr;
- int ret;
-
- pdata = dev_get_platdata(&spi->dev);
- if (pdata == NULL) {
- dev_err(&spi->dev, "no device data specified\n");
- return -EINVAL;
- }
-
- st = kzalloc(sizeof(struct tle62x0_state), GFP_KERNEL);
- if (st == NULL)
- return -ENOMEM;
-
- st->us = spi;
- st->nr_gpio = pdata->gpio_count;
- st->gpio_state = pdata->init_state;
-
- mutex_init(&st->lock);
-
- ret = device_create_file(&spi->dev, &dev_attr_status_show);
- if (ret) {
- dev_err(&spi->dev, "cannot create status attribute\n");
- goto err_status;
- }
-
- for (ptr = 0; ptr < pdata->gpio_count; ptr++) {
- ret = device_create_file(&spi->dev, gpio_attrs[ptr]);
- if (ret) {
- dev_err(&spi->dev, "cannot create gpio attribute\n");
- goto err_gpios;
- }
- }
-
- /* tle62x0_write(st); */
- spi_set_drvdata(spi, st);
- return 0;
-
- err_gpios:
- while (--ptr >= 0)
- device_remove_file(&spi->dev, gpio_attrs[ptr]);
-
- device_remove_file(&spi->dev, &dev_attr_status_show);
-
- err_status:
- kfree(st);
- return ret;
-}
-
-static int tle62x0_remove(struct spi_device *spi)
-{
- struct tle62x0_state *st = spi_get_drvdata(spi);
- int ptr;
-
- for (ptr = 0; ptr < st->nr_gpio; ptr++)
- device_remove_file(&spi->dev, gpio_attrs[ptr]);
-
- device_remove_file(&spi->dev, &dev_attr_status_show);
- kfree(st);
- return 0;
-}
-
-static struct spi_driver tle62x0_driver = {
- .driver = {
- .name = "tle62x0",
- },
- .probe = tle62x0_probe,
- .remove = tle62x0_remove,
-};
-
-module_spi_driver(tle62x0_driver);
-
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("TLE62x0 SPI driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("spi:tle62x0");
diff --git a/include/linux/spi/tle62x0.h b/include/linux/spi/tle62x0.h
deleted file mode 100644
index 5d74b9fffca2..000000000000
--- a/include/linux/spi/tle62x0.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * tle62x0.h - platform glue to Infineon TLE62x0 driver chips
- *
- * Copyright 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
-*/
-
-struct tle62x0_pdata {
- unsigned int init_state;
- unsigned int gpio_count;
-};
--
2.17.1
\
 
 \ /
  Last update: 2019-07-28 18:21    [W:0.063 / U:13.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site