lkml.org 
[lkml]   [2019]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: sun8i: a83t: Enable HDMI output on Cubietruck Plus
Date
From: Chen-Yu Tsai <wens@csie.org>

The Cubietruck Plus has an HDMI connector tied to the HDMI output of the
SoC.

Enables display output via HDMI on the Cubietruck Plus. The connector
device node is named "hdmi-connector" as there is also a display port
connector, which is tied to the MIPI DSI output of the SoC through a
MIPI-DSI-to-DP bridge. This part is not supported yet.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
.../boot/dts/sun8i-a83t-cubietruck-plus.dts | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index ea299d3d84d0..fb928503ad45 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -60,6 +60,17 @@
stdout-path = "serial0:115200n8";
};

+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";

@@ -153,6 +164,10 @@
cpu-supply = <&reg_dcdc3>;
};

+&de {
+ status = "okay";
+};
+
&ehci0 {
/* GL830 USB-to-SATA bridge here */
status = "okay";
@@ -172,6 +187,16 @@
status = "okay";
};

+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&mdio {
rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
--
2.20.1
\
 
 \ /
  Last update: 2019-07-28 17:00    [W:0.033 / U:2.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site